GAS POWER SHOVEL
1.
Install the fuel inlet screen with a .300 inch
diameter hollow tube. Ensure that the screen is
properly seated (Figure 210).
3.
4.
Install the fuel pump components onto the
carburetor body. NOTE: Prior to tightening the
pump cover screw, ensure that the fuel pump
gasket is in contact with the fuel pump cover and
that the fuel pump diaphragm is in contact with the
carburetor body.
Install the metering lever components. The
metering lever is properly adjusted when the top
surface of the lever is aligned to the carburetor
body with a straight edge (Figure 212). The lever
can be adjusted by gently bending it until it is flush
with the carburetor casting surface. NOTE:
Perform steps 5 and 6 in order.
Figure 210
0406-027
2.
Install the pump components over the locating
pins and on to the pump cover in this order:
A. Pump Gasket
B. Pump Diaphragm
Assure that the pump gasket and pump diaphragm
are flush with the surface of the pump cover
(Figure 211).
Figure 212
0406-029
5.
Install the metering diaphragm gasket over the
locating pins on the carburetor body (Figure 213).
Figure 211
0406-028
Figure 213
0406-030
Single Stage Snowthrower Service Manual
9 - 13
(3 votes, average: 4.67 out of 5)
Lawn and Garden readers have rated Toro Single Stage Snow Blower Service Manual 4.7 out of 5.0 based on 3 product reviews. EXCELLENT . Hard to find manual and very detailed . Only downside is the pics and wording in pics are backwards , but I can deal with that
The manual provides detailed step-by-step instructions for engine removal and installation but there is nothing in it about repair of the recoil starter. The engine removal instructions will be helpful because the starter is buried behind the fuel tank and engine support bracket. I think my problem is a sticking starter dog but getting to it will be a major project.
manual downloak for toro snwo thorower, downlod manual for toro