GAS POWER SHOVEL
5.
Remove the rope from the pulley and measure the
rope. Replace the rope with #4 Diamond Braid
Rope (Figure 234).
DRIVE SYSTEM
The Toro Gas Power Shovel drive system consists of a
crankshaft adapter, a rubber drive coupling, a series of
three drive gears, and a rotor.
Engine power is transferred from the engine crankshaft
and crankshaft adapter (through the rubber drive
coupling) through the gear train to the rotor (Figure
235).
Figure 234
0406-051
CAUTION
Carefully remove the rope pulley by slowly pulling
it straight upwards. The recoil starter spring is
attached to a small plastic boss on the underside
of the rope pulley. Injury may result if the spring
unwinds from the recoil starter housing.
Figure 235
0406-052
To service the drive system, assure that the rubber
drive coupling is fully seated on the crankshaft adapter
and into the drive gear assembly.
To check the gear train, remove the nut on the drive
side of the rotor (Figure 236) and remove the six
Phillips screws from the gear carrier plate (Figure 237).
Single Stage Snowthrower Service Manual
9 - 21
(3 votes, average: 4.67 out of 5) Lawn and Garden readers have rated Toro Single Stage Snow Blower Service Manual 4.7 out of 5.0 based on 3 product reviews.
EXCELLENT . Hard to find manual and very detailed . Only downside is the pics and wording in pics are backwards , but I can deal with that
The manual provides detailed step-by-step instructions for engine removal and installation but there is nothing in it about repair of the recoil starter. The engine removal instructions will be helpful because the starter is buried behind the fuel tank and engine support bracket. I think my problem is a sticking starter dog but getting to it will be a major project.
manual downloak for toro snwo thorower, downlod manual for toro