DRIVE SYSTEMS
ROTOR BEARING/ ROTOR SHAFT
REPLACEMENT
Loosen the 4 screws on the right side of the machine
several turns (Figure 100). Push the rotor towards the
drive side and spread the rotor housing (Figure 101).
Pull the right side (opposite the drive) of the rotor
forward until it clears the housing. The drive side of the
rotor can now be pulled out of the housing (Figure
102). The bearing on the right side (opposite the
drive) of the rotor is retained by a nut (Figure 103). It
will be necessary to hold the rotor shaft in a vise or with
a pipe wrench or vise grip in order to remove the nut.
Powerlite Style
Remove the belt cover and drive belt. Wedge a block
of wood in the rotor and remove the locknut holding the
rotor pulley in place. Remove the rotor pulley and hub.
The bearing will now slide off the shaft. Note there is a
sleeve inside the bearing; slip it out of the bearing
(Figure 98).
Next remove the 3 capscrews that hold the bearing
flange (Figure 98). There are 3 more capscrews on the
opposite side of the snowthrower holding the bearing
flange on that side (Figure 99). Remove them at this
time.
1
2
4
3
Figure 100
1854-15
Figure 98
1854-24
Figure 101
1854-23
Figure 99
1854-33
5 - 18
Single Stage Snowthrower Service Manual
(3 votes, average: 4.67 out of 5)
Lawn and Garden readers have rated Toro Single Stage Snow Blower Service Manual 4.7 out of 5.0 based on 3 product reviews. EXCELLENT . Hard to find manual and very detailed . Only downside is the pics and wording in pics are backwards , but I can deal with that
The manual provides detailed step-by-step instructions for engine removal and installation but there is nothing in it about repair of the recoil starter. The engine removal instructions will be helpful because the starter is buried behind the fuel tank and engine support bracket. I think my problem is a sticking starter dog but getting to it will be a major project.
manual downloak for toro snwo thorower, downlod manual for toro