ELECTRIC START SYSTEM
6.
Remove the three screws securing the starter
switch assembly to the control panel (Figure 151).
Installation
Reverse the removal procedures. Note: Incorrect
routing of the wire harness can cause electrical shock.
Route and fasten the wire harness away from all
moving parts.
STARTER SWITCH WITH RECTIFIER
TROUBLESHOOTING
Testing The Starter Switch Rectifier
A
On models with a rectifier as part of the starter switch
assembly, the rectifier converts alternating current into
pulsating direct current. This enables the use of a
direct current starter motor on a 120-volt alternating
current power supply (Figure 153). These instructions
do not apply to units with 120-volt AC starter motors.
Figure 151
1352-09
(A) Screws
7.
Remove the screw and R-clamp retaining the wire
harness to the engine.
Figure 153
0623-07
Figure 152
2261-02
8.
9.
Remove the two screws securing the starter motor
to motor mounting bracket (Figure 152).
Remove the starter assembly, wiring, and starter
switch box.
Single Stage Snowthrower Service Manual
6 - 7
(3 votes, average: 4.67 out of 5)
Lawn and Garden readers have rated Toro Single Stage Snow Blower Service Manual 4.7 out of 5.0 based on 3 product reviews. EXCELLENT . Hard to find manual and very detailed . Only downside is the pics and wording in pics are backwards , but I can deal with that
The manual provides detailed step-by-step instructions for engine removal and installation but there is nothing in it about repair of the recoil starter. The engine removal instructions will be helpful because the starter is buried behind the fuel tank and engine support bracket. I think my problem is a sticking starter dog but getting to it will be a major project.
manual downloak for toro snwo thorower, downlod manual for toro