DRIVE SYSTEMS
Rotor Pulley Replacement
3.
Before replacing with a new rotor pulley, be certain
to place the thin washer over the shaft first (Figure
71). If not, it will be very difficult to remove in the
future and binding between the rotor and side
plates may occur.
1.
2.
Refer to "Replacing Drive Belt" on page 5 - 1.
Complete steps 1 through 4.
Place a block of wood, (2” x 4”) as a wedge
between the rotor assembly and the housing
(Figure 70). With the use of a socket and a large
breaker bar turn the rotor pulley clockwise (Note:
The pulley is a left hand thread.) Remove the
rotor pulley.
Figure 71
0217-043
4.
5.
Next, turn the rotor pulley onto the shaft
(counterclockwise) finger tight (Figure 72). The
rotation of the pulley during operation will tighten
the pulley to the proper torque.
Replace the belt. Refer to "Replacing Drive Belt"
on page 5 - 1. Complete steps 5 through 7.
Figure 70
0217-042
Figure 72
0217-044
5 - 6
Single Stage Snowthrower Service Manual
(3 votes, average: 4.67 out of 5) Lawn and Garden readers have rated Toro Single Stage Snow Blower Service Manual 4.7 out of 5.0 based on 3 product reviews.
EXCELLENT . Hard to find manual and very detailed . Only downside is the pics and wording in pics are backwards , but I can deal with that
The manual provides detailed step-by-step instructions for engine removal and installation but there is nothing in it about repair of the recoil starter. The engine removal instructions will be helpful because the starter is buried behind the fuel tank and engine support bracket. I think my problem is a sticking starter dog but getting to it will be a major project.
manual downloak for toro snwo thorower, downlod manual for toro