ELECTRIC START SYSTEM
INTRODUCTION
4.
Remove the three bolts (Figure 132) to the starter
switch box.
The electric start single stage snowthrowers use a 120-
volt starting system. When the starter is supplied with
voltage, the helical shaft spins forcing the pinion gear
to slide out on the shaft and engage the ring gear.
CCR POWERLITE STARTER REMOVAL
1.
2.
Drain the fuel from the fuel tank using a pump type
siphon. Caution: Ignition of fuel can result in
severe personal injury of death. Store fuel in an
approved fuel storage container.
Remove the two bolts holding the upper shroud to
the front housing (Figure 130).
Figure 132
1854-37
5.
Lift upper shroud up and remove the wires to the
key switch (Figure 133).
A
B
Figure 130
1854-26
3.
Remove the two bolts (Figure 131) holding the
upper shroud to the handle.
Figure 133
1854-06
(A) Wires
(B) Primer Hose
Figure 131
1352-02
Single Stage Snowthrower Service Manual
6 - 1
(3 votes, average: 4.67 out of 5) Lawn and Garden readers have rated Toro Single Stage Snow Blower Service Manual 4.7 out of 5.0 based on 3 product reviews.
EXCELLENT . Hard to find manual and very detailed . Only downside is the pics and wording in pics are backwards , but I can deal with that
The manual provides detailed step-by-step instructions for engine removal and installation but there is nothing in it about repair of the recoil starter. The engine removal instructions will be helpful because the starter is buried behind the fuel tank and engine support bracket. I think my problem is a sticking starter dog but getting to it will be a major project.
manual downloak for toro snwo thorower, downlod manual for toro