Toro Single Stage Snow Blower Service Manual

ENGINE REMOVAL AND INSTALLATION
5.
The upper shroud/fuel tank is retained by one
screw in each corner.  On electric start models
only, remove the three screws surrounding the
starter button (Figure 52).  These screws hold the
switch box to the upper shroud.  Unless they are
removed the wire harness between the switch box
and the starter motor will prevent complete shroud
removal (Figure 49).  Once they are removed the
upper shroud and tank can be lifted enough to
remove the primer line, unplug the wiring from the
switch and the fuel line from the fitting on the
bottom of the tank.  Note:  There might be a small
amount of fuel in the fuel line.  Be prepared with a
shop towel to catch any remaining fuel.  
A
B
C
Depending on what work is to be done, the shroud
could hang from the starter rope.  If the engine is
to be removed, tie a knot in the starter rope
between the recoil starter and the shroud.  The
knot in the starter handle can now be untied and
the rope pulled through the shroud.
Figure 50
1854-17-2
(A)  Bracket
(B)  Locknut
(C) Stud
  
7.
The engine can now be moved to the right until
the 4 mounting studs clear the side plate and the
engine can be lifted out.  (Caution:  The choke
arm protrudes through a slot in the lower shroud,
do not damage it when lifting the engine out of the
chassis.) (Figure 51).  You may prefer to remove
the lower shroud as there are only two screws
holding it on.   Note: There is a second engine
plate on the inside of the side plate, this may fall
off when the engine is lifted out of the chassis.
A
B
Figure 49
1854-06
(A)  Switch Box
(B)  Wire Harness
6.
The recoil side of the engine is supported by a
bracket.  Remove the bracket or remove the
locknut holding the bracket to the recoil (it may be
necessary to loosen the bracket to disengage it
from the stud on the recoil) (Figure 50).  Remove
the 4 nuts around the crankshaft and slide the
plate off the crankshaft.
Figure 51
1854-36
4 - 6
Single Stage Snowthrower Service Manual
Product Specification
CategoriesSnow Blower Manuals, Toro Snow Blower
Tags, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 124 pages
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(3 votes, average: 4.67 out of 5)
Lawn and Garden readers have rated Toro Single Stage Snow Blower Service Manual 4.7 out of 5.0 based on 3 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

Toro Single Stage Snow Blower Service Manual SKU UPC Model
Frank Husted on Mar 26, 2018. Toro CCR2000 manual

EXCELLENT . Hard to find manual and very detailed . Only downside is the pics and wording in pics are backwards , but I can deal with that


William Scheuerell on Feb 11, 2018. Complete, except...

The manual provides detailed step-by-step instructions for engine removal and installation but there is nothing in it about repair of the recoil starter. The engine removal instructions will be helpful because the starter is buried behind the fuel tank and engine support bracket. I think my problem is a sticking starter dog but getting to it will be a major project.


Mark on Dec 23, 2016.

manual downloak for toro snwo thorower, downlod manual for toro


Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website