Removal (Fig. 57)
Park machine on a level surface, lower cutting
decks, stop engine, apply parking brake and remove
key from the ignition switch.
Installation (Fig. 57)
1.
1. If fittings were removed from motor, lubricate and
place new O--rings onto fittings. Install fittings into port
openingsusingmarksmadeduringtheremovalprocess
to properly orientate fittings. Tighten fittings (see Hy-
draulic Fitting Installation in the General Information
section of this chapter).
2.
Installing Hydraulic System Components at the begin-
ning of the Service and Repairs section of this chapter.
Read the General Precautions for Removing and
2.
that arrows on the side of motor case point upward.
Positionwheelmotortobrakeassemblymakingsure
NOTE: To ease installation, tag the hydraulic hoses to
show their correct position on the wheel motor.
3.
Slide motor into brake assembly.
Align splines on motor shaft and splined brake shaft.
3.
motor. Put caps or plugs on motor ports and hose open-
ings to prevent contamination.
Disconnect hydraulic hoses and tubes from wheel
4. Secure motor to brake assembly with cap screws
andflatwashers.Tightencapscrews from75to85ft--lb
IMPORTANT: Before loosening fasteners, support
wheel motor to prevent motor fromfalling during re-
moval.
(101
to 115 N--m).
5. Remove plugs from wheel motor ports and hose
openings. Attach hydraulic hoses and tubes to wheel
motor (see Hydraulic Hose and Tube Installation in the
General Information section of this chapter).
4.
Remove wheel motor using Figure 57 as a guide.
5.
If hydraulic fittings are to be removed from motor,
mark fitting orientation to allow correct assembly. Re-
move fittings from motor and discard O--rings.
6.
Fill reservoir with hydraulic fluid as required.
Groundsmaster 4000--D
Page 4 -- 81
Hydraulic System
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 30412, Toro Groundsmaster 4000 D |
Download File |
|
Document Type | Catalog |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |