11.
(Fig. 14).
Remove fan hub and fan from hydraulic fan motor
3
1
2
4
5
A. Remove hex nut(item 9) and washer (item 8)that
secure fan hub and fan assembly to fan motor.
NOTE: The fan motor shaft is tapered.
8
B. Usesuitable pullertoremove fanhub(withfanat-
tached) from fan motor shaft taking care to not dam-
age fan. Remove fan hub and fan from machine.
6
7
12.Remove
transport cylinder assembly from engine
mount (Fig. 15). It is not necessary to remove the hy-
draulic hose from the cylinder. Locate and remove shim
plate(s) from between transport cylinder and engine
mount.
12
9
10
11
Figure 13
IMPORTANT: The hydraulic pump assembly can re-
main in machine during engine removal. To prevent
pump from shifting or falling, make sure to support
pump assembly before mounting fasteners are re-
moved.
1.
2.
3.
4.
5.
6.
Lock nut
7.
8.
9.
10. Cap screw (2 used)
11. Throttle cable
12. Cable support
Flange head screw
Spring washer (2 used)
Ball joint
Flat washer
Throttle lever
Lock nut
Flange head screw
Cap screw
13.Support
hydraulic pump assembly. Remove fasten-
ers that secure pump assembly to engine (see Pump
Assembly Removal in the Service and Repairs section
of Chapter 4 -- Hydraulic System).
27 to 33 ft--lb
(37
to 44 N--m)
1
11
10
14.Make
sure all cable ties securing the wiring harness,
fuel lines or hydraulic hoses to the engine are removed.
15.Connect
16.Remove
screws securing the engine mounts to the engine sup-
ports.
hoist or lift to the lift tabs on engine.
2
flange nuts, rebound washers and cap
9
8
3
5
CAUTION
6
4
7
12
(17
to 14 ft--lb
to 18 N--m)
One person should operate lift or hoist while
another person guides the engine out of the ma-
chine.
Figure 14
1.
2.
3.
4.
5.
6.
Fan motor
7.
8.
9.
Cap screw (4 used)
Hex nut
IMPORTANT: Make sure not to damage the engine,
fuel and hydraulic lines, electrical harness or other
components while removing the engine.
Cap screw (2 used)
Flat washer (2 used)
Fan motor bracket
Lock nut (2 used)
Washer (4 used)
Washer
10. Fan hub
11. Fan
17.Carefully
chine.
remove engine assembly from the ma-
18.If
necessary,remove engine mounts fromtheengine
using Figure 9 as a guide.
Engine Installation (Fig. 9)
1.
Ifremoved,installengine mounts totheengineusing
Figure 9 as a guide.
2.
Connect hoist or lift to the engine lift tabs.
Kubota Diesel Engine
Page 3 -- 14
Groundsmaster 4000--D
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 30412, Toro Groundsmaster 4000 D |
Download File |
|
Document Type | Catalog |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)