Toro 08161SL Service Manual Model 30412 Groundsmaster 4000 D Preface Publication

Procedure for Engine Cooling Fan Circuit Test
Make sure hydraulic oil is at normal operating tem-
3
2
1.
perature by operating the machine for approximately 10
minutes. Make sure the hydraulic tank is full.
2.
decks lowered and off. Make sure engine is off and the
parking brake is applied. Raise and support hood.
Park machine  on  a level  surface with  the cutting
1
CAUTION
Prevent personal injury and/or damage to equip-
ment. Read all WARNINGS, CAUTIONS and Pre-
cautions for Hydraulic Testing at the  beginning
of this section.
Figure 44
1.
2.
Fan drive manifold
PRV solenoid
3.
Test port
3.
Raise seat to gain access to cooling fan circuit test
port at the fan drive manifold (Fig. 44). Connect a 5,000
PSI(345 bar)gauge withhydraulic  hoseattached totest
port on top of manifold.
4.
Start the engine.  Move throttle to full speed   (2870
RPM).
5.
While monitoring  the pressure gauge  and using a
phototac to identify the  cooling fan speed, disconnect
the  wire  harness  connector (white/green  and  black
wires)fromthePRVsolenoidonfandrivemanifold.Both
fan speed and pressure should  increase and stabilize
after the solenoid is disconnected.
PRESSURE  GAUGE READING  TO  BE  approxi-
mately 3000 PSI (207 bar).
PHOTOTAC READING TO BE: fan speed approxi-
mately 2800 RPM.
6.
7.
bar) but fan speed is low, consider that the fan motor is
worn or damaged. If pressure and fan  speed are both
low, consider that the gear  pump is worn or damaged
(see Engine Cooling Circuit Gear Pump Flow Test).
Stop engine and record test results.
If pressure  rises to  approximately  3000 PSI (207
NOTE:  Ifpressure and fan speed are bothlow andgear
pump flow proves tobe correct, suspect thatseals infan
drive manifold are leaking or faulty (see Fan Drive Man-
ifold Service in the Service and Repairs section of this
chapter).
8.
and reconnect wire harness to PRV solenoid.
When testing is complete, remove pressure gauge
Groundsmaster 4000--D
Page 4 -- 57
Hydraulic System
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 298 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website