Seat Switch
The seat switch is normally open and closes when the
operator is on the seat. The seat switch and its electrical
connector are located in the seat assembly. If the trac-
tionsystemorPTOswitchisengagedwhentheoperator
raises out of the seat, the engine will stop. Testing of the
switch can be done without seat removal by disconnect-
ing the seat wire from the machine wiring harness (Fig.
23).
2
Testing
1
1.
2.
Make sure the engine is off.
Disconnect wire harness electrical connector for the
seat switch.
3.
multimeter (ohms setting) across the connector termi-
nals.
Check the continuity of the switch by connecting a
Figure 23
1.
2.
Seat switch electrical connector
Operator seat
4.
continuity between the seat switch terminals.
With no pressure on the seat, there should be no
5.
cushion. There should be continuity as the seat cushion
approaches the bottom of its travel.
Press directly onto the seat switch through the seat
6.
place seatswitch (see Operator Seat Service intheSer-
vice and Repairs section of Chapter 7 -- Chassis).
If testing determines that seat switch is faulty, re-
7.
Connect seat switch to harness connector after test-
ing is complete.
Groundsmaster 4000--D
Page 5 -- 15
Electrical System
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 30412, Toro Groundsmaster 4000 D |
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)