Fuel Pump
The fuel pump is attached to the frame above the fuel
water separator (Fig. 36).
2
3
Operational Test
1.
decks, stop engine and apply parking brake.
Park machine on a level surface, lower cutting
2.
the fuel stop solenoid to prevent the engine from firing.
Disconnect wire harness electrical connector from
3.
Disconnect fuel hose (pump discharge) from the fuel
water separator.
1
4
4.
Make sure fuel hoses attached to the fuel pump are
free of obstructions.
Figure 36
5.
uated cylinder sufficient enough to collect 1 quart (0.95
liter).
Place fuel hose (pump discharge) into a large, grad-
1.
2.
Fuel water separator
Fuel pump
3.
4.
Pump inlet hose
Pump discharge hose
Fuel Pump Specifications
6.
Collect fuel in the graduated cylinder by turning igni-
tion switch to the ON position. Allow pump to run for 15
seconds, then turn switch to OFF.
Pump Capacity
Pressure
64 fl oz/min (1.9 l/min)
7 PSI (48.3 kPa)
2.0 amp
7.
The amount of fuel collected in the graduated cylin-
der should be approximately 16 fl oz (475 ml) after 15
seconds.
Current Draw
8.
Replace fuel pump as necessary. Install fuel hose to
the water separator.
9.
Connect wire harness electrical connector tothefuel
stop solenoid.
10.Prime
fuel system.
Electrical System
Page 5 -- 24
Groundsmaster 4000--D
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 30412, Toro Groundsmaster 4000 D |
Download File |
|
Document Type | Catalog |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |