Traction Neutral Switch
The traction neutral switch is closed when the traction
pedalisintheneutralpositionandopenswhenthepedal
is depressed in either direction. The switch is located on
the right side of the piston (traction) pump (Fig. 46).
Testing
2
Test the switch by disconnecting the wires from the
switch terminals and connecting a continuity tester
across the two switch terminals. With the engine turned
off,slowly pushthetraction pedalinaforward orreverse
direction while watching the continuity tester. There
should be indications that the traction neutral switch is
opening and closing. Allow the traction pedal to return
to the neutral position. There should be continuity
across the switch terminals when the traction pedal is in
the neutral position.
1
Figure 46
2.
1.
Piston pump (bottom)
Neutral switch
See the Eaton Model 72400 Servo Controlled Piston
Pump Repair Information at the end of Chapter 4 -- Hy-
draulic System for disassembly and assembly proce-
dures for the neutral switch.
Diode Assemblies
The Groundsmaster 4000--D electrical system includes
several diode assemblies (Fig. 47) that are used for cir-
cuit protection and circuit logic control. The diodes plug
into the wiring harness at various locations on the ma-
chine.
2
The diodes D2, D4, D5 and D6 are used for circuit
protectionfrominductivevoltagespikesthatoccurwhen
a hydraulic valve solenoid is de--energized. Diode D2 is
intheTransport/Mowcircuit,D4isin theleftcutting deck
circuit, D5 is in the front cutting deck circuit and D6 is in
the right cutting deck circuit.
3
1
Figure 47
1.
2.
Diode
Male terminal
3.
Female terminal
Diode D9 provides logic for the high temperature warn-
ing system.
If the machine is equipped with the optional cruise con-
trol kit, two (2) additional diodes are used. Diode D7 in
thiskitisused forcircuit protection that occur when ahy-
draulic valve solenoid is de--energized. Diode D8 pro-
vides a latching circuit to keep the cruise relay
energized.
Multimeter
Red Lead (+)
on Terminal
Multimeter
Black Lead (--)
on Terminal
Continuity
Female
Male
Male
YES
NO
Female
Testing
The diodes can be individually tested using a digital
multimeter (diode test or ohms setting) and the table to
the right.
Groundsmaster 4000--D
Page 5 -- 29
Electrical System
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 30412, Toro Groundsmaster 4000 D |
Download File |
|
Document Type | Catalog |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)