Removal (Fig. 5)
Position machine on a clean, level surface. Lower
7. Lubricate grease fittings on cutting deck and lift arm
assembly.
1.
cutting decks, stop engine, apply parking brake and re-
move key from the ignition switch.
2.
ting Deck Motor Removal in the Service and Repairs
Section of Chapter 4 -- Hydraulic System).
Remove hydraulic motor from cutting deck (see Cut-
3
IMPORTANT: Donotchangethelengthofthedamp-
er link (Fig. 7).
1
1
3.
Remove hairpin and clevis pin thatsecure thedamp-
er link to the rear of the cutting deck (Fig. 7).
2
4.
washers thatsecure deck mount to cutting deck (Fig. 6).
Remove eight (8) cap screws, lock washers and flat
Figure 6
3.
5.
cutting deck.
Raise lift arm enough to separate deck mount from
1.
2.
Flange head screw
Hydraulic motor
Deck mount screw
6.
Slide the cutting deck away from the traction unit.
Installation (Fig. 5)
1.
engine, apply parking brake and remove key from the
ignition switch.
Position machine on a clean, level surface. Stop
2.
mount.
Position the side cutting deck to the lift arm and deck
1
3.
deck.
Lower lift arm while aligning deck mount to cutting
5.295”
to 5.445”
(134 to 138mm)
4.
screws, lock washers and flat washers (Fig. 6). Tighten
fasteners.
Install deck mount to cutting deck with (8) cap
2
IMPORTANT: The length of the damper link should
be 5.295” to 5.445” (134 to 138 mm) measured be-
tween rod end centers.
Figure 7
1.
Damper link
2.
Clevis pin
5.
Install clevis pin and hairpin that secure the damper
link to the rear of the cutting deck (Fig. 7).
6.
Deck Motor Installation in the Service and Repairs Sec-
tion of Chapter 4 -- Hydraulic System).
Install hydraulic motor to cutting deck (see Cutting
Groundsmaster 4000--D
Page 8 -- 9
Cutting Decks
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 30412, Toro Groundsmaster 4000 D |
Download File |
|
Document Type | Catalog |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |