Removal (Fig. 68)
Park machine on a level surface, lower cutting units,
stop engine, engage parking brake and remove key
from the ignition switch.
1.
2
1
NOTE: Thereartiremustberemovedtoallowsufficient
clearance to remove the steering cylinder from the ma-
chine.
Figure 69
2.
WARNING
1.
Steering cylinder
Jam nuts
Beforejackingupthemachine,reviewandfollow
Jacking Instructions in Chapter 1 -- Safety.
3
2.
3.
Jack or lift rear wheel off the ground.
Remove rear wheel from the drive studs and wheel
2
hub.
4.
steering cylinder to prevent hydraulic system contami-
nation.
Thoroughlycleanhydraulichoseendsandfittingson
1
Figure 70
1.
2.
Steering cylinder
Rear fork
3.
Jam nuts
WARNING
Before disconnecting or performing any work
on the hydraulic system, all pressure in the
system must be relieved. See Relieving Hy-
draulic System Pressure in the General Infor-
mation section.
5.
Remove steering cylinder from the frame and rear
fork using Figure 68 as guide.
6.
cylinder, mark fitting orientation to allow correct assem-
bly.
If hydraulic fittings are to be removed from steering
Installation (Fig. 68)
1.
fittings to cylinder using marks made during theremoval
process to properly orientate fittings.
Iffittings were removed from steering cylinder,install
2.
Install steering cylinder to the frame and rear fork us-
ing Figure 68 as guide. When securing cylinder ball
joints to machine, tighten the first jam nut from 65 to 85
ft--lb (88 to 115 N--m), then tighten the second jam nut
to the same specification.
3.
nuts. Lower machine to the ground. Torque lug nuts in
a crossing pattern from 45 to 65 ft--lb (61 to 88 N--m).
Mount rear wheel to the machine with four (4) lug
4.
essary (see Traction Unit Operator’s Manual).
Makesurehydraulic tankisfull.Addcorrectoilifnec-
Groundsmaster 3505--D
Page 4 -- 103
Hydraulic System
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 3505 D |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)