Solenoid Valve Coil
Thesolenoid valve coilon thehydraulic controlmanifold
(Fig. 32) can be replaced without opening the hydraulic
system.
4
3
2
Removal
1.
decks, engage parking brake, stop engine and remove
key from the ignition switch.
Park machine on a level surface, lower cutting
60 in--lb
(6.8 N--m)
2.
Disconnect the wire harness electrical connector
from the solenoid valve coil.
3.
4.
Remove the nut from the spool assembly.
Slidethecoilassemblyfromthesolenoidvalvestem.
Discard the coil.
1
5.
Clean any corrosion or dirt from the valve stem.
Installation
Figure 32
1.
2.
Hydraulic manifold
Solenoid valve (R1)
3.
4.
Solenoid valve coil
Nut
1.
stem.
Slide new coil assembly onto the solenoid valve
2.
nut 60 in--lb (6.8 N--m) (do not over tighten).
Install the nut onto the spool assembly and torque
3.
Connect the wire harness electrical connector to the
solenoid valve coil.
Electrical System
Page 5 -- 26
Groundsmaster 3505--D
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 3505 D |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |