Toro 05145SL Rev B Groundsmaster 3505 D Service Manual

Removal (Fig. 11)
Park machine on a level surface, lower cutting units,
3
1.
stop engine,  engage parking  brake  and remove  key
from the ignition switch.
3
2.
lift arms (see Cutting Unit Operator’s Manual).
Remove cutting units from the pivot shaft of the front
2
NOTE:  Remove both spacers from the hydraulic cylin-
4
der shaft clevis when removing the right, front lift arm.
3.
by removing external retaining rings and pins.
Disconnect hydraulic cylinder from the front lift arms
4
1
4.
Remove both flange head  screws and carrier stop
bracket from the lift arm pivot shafts.
Figure 12
1.
2.
Carrier frame
Front lift arm (LH shown)
3.
4.
Lift arm bushing
Frame bushing
5.
6.
Slide lift arm off the pivot shaft.
Disassemble lift arm as necessary using Figure  11
as a guide.
1
7.
12).
Inspect bushings  in lift arm and  carrier frame (Fig
If bushings are  worn or damaged,  replace bush-
1
ings.
Installation (Fig. 11)
1.
Assemble lift arm using Figure 11 as a guide.
A.  If clamps (item  20) were  removed, torque  cap
screws (item 20) from 55 to 65 ft--lb (75 to 88 N--m).
3
2
B.  Ifcarrierframepivotshaft(item40)wasremoved,
apply antiseize lubricant to pivot shaft before instal-
ling carrier frame.
Figure 13
3.
1.
2.
Hydraulic hose
Hydraulic cylinder
Clearance
2.
3.
Slide lift arm onto the lift arm pivot shaft.
Secure carrier  stop bracket with  both flange head
screws to the lift arm pivot shafts.
NOTE:  Install both  spacers to  the hydraulic  cylinder
shaft clevis when installing the right, front lift arm.
4.
Secure hydraulic cylinder to the lift arm with pins and
external retaining rings.
5.
0.040”
Route hydraulic hoses so they clear  the lift arm by
to 0.120” (1.0 to 3.0 mm) when the lift arm is fully
raised (Fig. 13).
6.
Adjust lift arms  for proper clearance  (see Traction
Unit Operator’s Manual).
7.
Install cutting unit to the front lift arm pivot shaft (see
Cutting Unit Operator’s Manual).
8.
Grease front lift arms (see Traction Unit Operator’s
Manual).
Groundsmaster 3505--D
Page 6 -- 17
Chassis
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 210 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website