Removal (Fig. 14)
Park machine on a level surface, lower cutting units,
stop engine, engage parking brake and remove key
from the ignition switch.
3. Secure hydraulic cylinder clevis to the lift cylinder
shaft oftherear liftarm with the thrust washer and exter-
nal retaining ring.
1.
4. Install rear cutting unit to the pivot shaft of the rear lift
arm (see Cutting Unit Operator’s Manual).
2.
Remove cutting unit from the pivot shaft of the rear
lift arm (see Cutting Unit Operator’s Manual).
5. Adjustliftarmforproperclearance(seeTractionUnit
Operator’s Manual).
3.
Remove external retaining ring and thrust washer
from the hydraulic lift cylinder shaft of the rear lift arm.
IMPORTANT: Make sure hydraulic hoses are free of
twists and sharp bends. Raise cutting units and
make sure that rear cutting unit hoses do not con-
tact the traction cable bracket. If required, reposi-
tion fittings and hoses.
4.
Remove flange head screw and thrust washer from
the rear pivot shaft.
5.
Slide rear lift arm from rear pivot shaft and hydraulic
lift cylinder.
6.
Grease rear lift arm (see Traction Unit Operator’s
Manual).
6.
Disassemble lift arm as necessary using Figure 14
as a guide.
3
7.
Inspect bushings in lift arm and carrier frame (Fig
15).
If bushings are worn or damaged, replace bush-
4
ings.
Installation (Fig. 14)
1.
Assemble lift arm using Figure 14 as a guide.
3
2
A. If the rear lift arm pivot shaft (item 16) was re-
moved from frame, thoroughly clean tapered sur-
facesofshaftandframe.Positionpivotshafttoframe
and secure with washer and jam nut. Torque jam nut
from 200 to 250 ft--lb (271 to 339 N--m).
4
1
Figure 15
1.
2.
Rear lift arm
Carrier frame
3.
4.
Frame bushing
Lift arm bushing
B. If the carrier frame pivot shaft (item 25) was re-
moved from lift arm, apply antiseize lubricant to pivot
shaft before inserting into lift arm. Secure pivot shaft
with two (2) cap screws (items 2 and 4) and washer
(item 3).
2.
thattheliftcylinder shaftoftherearliftarmslides intothe
clevis of the hydraulic lift cylinder.
Slide rear lift arm onto rear pivot shaft making sure
Groundsmaster 3505--D
Page 6 -- 19
Chassis
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 3505 D |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)