Roller Disassembly (Fig. 6)
3. Use tool TOR4068 to install inner seal.
4. Use tool TOR4069 to install outer seal.
1.
Remove retaining ring from both ends of roller.
2.
Hit end of roller shaft with a soft face hammer to re-
5. Install retaining ring so that side with sharp edges
faces end of roller (out).
move seals and bearing from one end of roller. Hit other
end of roller shaft to remove seals and bearing from oth-
er end of roller. Be careful not to drop roller shaft.
6.
7.
8.
Use tool TOR4071 to install outer oil seal.
Use tool TOR4067 to install washer.
3.
Discard seals and bearings.
Put opposite end of roller facing up and support bot-
tom end with tool TOR4067. Repeat steps 3 - 7.
Roller Assembly (Fig. 6)
NOTE: Asoftfacehammercanbeusedwiththespecial
tools listed (see Special Tools) to assemble the roller,
however use of a press is recommended.
9.
purpose lithium base grease to lubricate bearings until
grease appears at washer. Wipe off excess grease.
Use a hand operated grease gun and No. 2 general
1.
to install inner oil seal into each end of roller tube.
Use installation tool TOR4065 and handle TOR4073
2.
Install ball bearings:
NOTE: Ball bearings have a press fit into the roller tube
and a slip fit onto the roller shaft.
IMPORTANT: If ball bearing has a seal on one side,
install bearing with seal orientated toward the out-
side of the roller.
A. Use tool TOR4066 and handle TOR4073 to
install ball bearing into one end of roller tube.
B. Install roller shaft from opposite end of roller. Be
careful not to damage the inner oil seals.
C. Put roller in a vertical position and support shaft
and bearing with tool TOR4067.
D. Use tool TOR4067 to install second ball bearing.
Groundsmaster 3505--D
Page 7 -- 9 Rev. A
Cutting Units
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 3505 D |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)