Toro 05145SL Rev B Groundsmaster 3505 D Service Manual

Removal (Fig. 38)
Park machine on a level surface, lower cutting units,
1.
stop engine,  engage parking  brake  and remove  key
from the ignition switch.
3
2.
deck motor to prevent hydraulic system contamination.
Thoroughlycleanhydraulichoseendsandfittingson
2
4
WARNING
4
1
Before disconnecting or performing any work
on the  hydraulic system,  all pressure  in the
system must  be relieved.  See  Relieving Hy-
draulic System Pressure in the General Infor-
mation section.
Figure 39
1.
2.
Cutting deck motor
Inlet hose
3.
4.
Relief valve
Socket head screw
NOTE:  Note position of hydraulic hoses when remov-
ing hoses from thecutting deck motors. Proper position-
ing is critical when reconnecting  hydraulic hoses. The
inlet to the motor is opposite from the relief valve (Fig.
39).
3.
Remove hydraulic hoses from motor using Figure 38
as a guide.
4.
ers that secure hydraulic motor to the cutting unit (Fig.
Remove two (2) socket head screws and flat wash-
39).
Remove hydraulic motor from deck. Locate and re-
trieve o--ring from top of spindle housing.
5.
mark fitting orientation to allow correct assembly.
If hydraulic  fittings are to be  removed from motor,
Installation (Fig. 38)
1.
marks made  during the  removal process  to properly
orientate fittings.
If fittings were removed, install fittings to motor using
2.
draulic motor to the cutting unit with two (2) socket head
screws and flat washers.
Position o--ring to top of spindle housing. Install hy-
3.
Install hydraulic hoses to motor using Figure 38 as a
guide.
4.
essary (see Traction Unit Operator’s Manual).
Makesurehydraulic  tankisfull.Addcorrectoilifnec-
Groundsmaster 3505--D
Page 4 -- 63
Hydraulic System
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 210 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website