Removal (Fig. 4)
If cutting unit is equipped with rear roller scraper, re-
30
(41
ft--lb
N--m)
1.
move fasteners securing left and right scraper rod
brackets to roller mounts (Fig. 5). Remove scraper rod
assembly.
3
2
4
1
2.
er mounts to rear of deck frame. Remove roller mounts
and rear roller assembly from deck frame.
Remove four (4) flange head screws that secure roll-
3.
er mounts. Remove mounts from roller.
Loosencapscrewssecuringeachendofrollertoroll-
Installation (Fig. 4)
5
1.
Place roller assembly into roller mounts.
Figure 5
2.
deckframe.Secureassemblytodeckframewithfour(4)
flange head screws.
Install roller and roller mount assembly into rear of
1.
2.
3.
Roller scraper
Scraper plate
Cap screw
4.
5.
Cap screw
Jam nut
IMPORTANT: If roller design includes grease fittings in
roller fasteners (items 9 and 10 in Fig. 4), make sure the
grease groove in each roller mount aligns with the
grease hole in each end of the roller shaft. To help align
the groove and hole, there is also an alignment mark on
one end of the roller shaft.
3.
Ifequippedwithscraperrod,installandadjustscrap-
er rod assembly to roller mounts (Fig. 5). Torque cap
screws 30 ft--lb (41 N--m) and tighten jam nut to secure
scraper rod and rear roller to cutting deck.
4.
roller mounts. Torque screws from 29 to 35 ft--lb (39 to
Tighten cap screws securing each end of roller to
47
N--m).
Groundsmaster 3505--D
Page 7 -- 7 Rev. A
Cutting Units
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 3505 D |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)