Seat Switch
The seat switch is normally open and closes when the
operator is occupying the seat. The seat switch is lo-
cated directly under the seat. If the operator leaves the
seat, the engine will stop unless the traction pedal is in
the neutral position.
The closed seat switch (seat occupied) and diode D1
keep the interlock relay energized and the engine run-
ning when the traction pedal is depressed.
1
2
Testing
1.
stop engine, apply parking brake and remove key from
ignition switch.
Park machine on a level surface, lower attachment,
3
6
2.
ing.
Tilt up operator seat and locate seat switch for test-
4
5
3.
Disconnect harness electrical connector from the
seat switch.
4.
multimeter (ohms setting) across the switch terminals.
Check the continuity of the switch by connecting a
Figure 15
5.
With no pressure on the seat, there should be no
continuity between the seat switch terminals.
1.
2.
3.
Operator seat
Seat switch
Seat base
4.
5.
6.
RH seat adjuster
Seat shroud
LH seat adjuster
6.
Press directly onto the seat switch through the seat
cushion. There should be continuity as the seat cushion
approaches the bottom of its travel.
7.
Connect harness electrical connector to seat switch
after testing.
8.
Lower operator seat.
Electrical System
Page 5 – 12
Sand Pro & Infield Pro 3040/5040
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro 3040, Toro 5040 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)