Removal (Fig. 9)
Park machine on a level surface, lower attachment,
Installation (Fig. 9)
1.
1. Position new parking brake cable to machine noting
original routing.
stop engine and remove key from ignition switch.
2.
3.
Make sure parking brake is disengaged.
2. Secure brake cable to parking brake bellcrank on
rear cross tube of frame:
Remove console from machine (see Console Re-
moval in this section).
A. Slide spacer and brake cable end onto shoulder
bolt.
4.
Loosen jam nuts that secure parking brake cable to
brake lever bracket.
B. Secure parking brake cable end to parking brake
bellcrank with flange nut.
5.
Remove retaining ring that secures brake cable to
brake lever. Slide brake cable from lever.
3. Position brake cable end to parking brake lever. Se-
cure cable end to lever with retaining ring.
6.
Remove brake cable from parking brake bellcrank
on rear cross tube of frame:
4. Secure brake cable to brake lever bracket with jam
nuts.
A. Remove flange nut that secures parking brake
cable end to parking brake bellcrank.
5. Install console to machine (see Console Installation
in this section).
B. Slide brake cable end and spacer from shoulder
bolt.
6. Check parking brake operation.
7.
Note routing of parking brake cable. Remove brake
cable from machine.
Sand Pro & Infield Pro 3040/5040
Page 6 – 15
Chassis
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro 3040, Toro 5040 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)