Toro 06147SL Rev A Sand Pro Field Pro 3040 5040 Service Manual

7.
Put caps or plugs on disconnected hoses, tubes and
fittings to prevent contamination.
8.
Remove steering wheel from machine:
A.  Remove cover from steering wheel.
B.  Loosen and  remove  nut that  secures  steering
wheel to steering control valve. Remove flat washer
from control valve shaft.
C. Slide steering wheel and foam collar from steer-
ing control valve.
9.
Support steering control valve to prevent it from fal-
ling during removal.
Figure 54
10.Loosen
and remove four (4) cap screws that secure
steering control valve to machine.
11.
Remove steering control valve from machine.
Installation (Fig. 53)
Position  steering  control  valve  to  frame.  Secure
5
1.
steering control valve  to steering column with  four (4)
cap screws.
4
1
2.
tubes and fittings.
Remove caps and plugs from disconnected  hoses,
3
2
3.
Lubricate new o–rings and connect hydraulic hoses
and tubes to steering control valve (Fig. 55). Use labels
placed during  the removal  process to  properly install
hoses and tubes to steering control valve. Tighten con-
nections.
Figure 55
Hose from hydrostat (Port P)
Tube to oil cooler Tee fitting (Port T)
Tube to lift control Tee fitting (Port E)
Hose to steering cylinder barrel end (Port R)
Hose to steering cylinder rod end (Port L)
4.
Slide foam collar  and steering wheel onto  steering
1.
2.
3.
4.
5.
control valve shaft and secure with flat washer and lock
nut. Torque lock nut 20 to 26 ft–lb (27 to 35 N–m). Install
cover.
5.
tion in the Service and  Repairs section of Chapter 3 –
Engine).
Install fuel tank to machine (see Fuel Tank Installa-
6.
quired (see Traction Unit Operator’s Manual).
Check hydraulic fluid level in tank and adjust as re-
7.
system (see Charge Hydraulic System in this section).
Operate machine functions slowly  until air is out of
8.
and fittings are not contacted by anything and that there
are no leaks.
Rotate steering wheel to verify that hydraulic hoses
Sand Pro & Infield Pro 3040/5040
Page 4 – 65
Hydraulic System
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 152 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website