6.
spindle shaft so the bearing locking collar faces the
wheel.
Slide flangette and bearing assembly onto the
9. Lower machine completely to the ground. Make sure
flangettes and hydraulic motor are positioned correctly
into the fork. Tighten fasteners to secure wheel to front
fork.
7.
Position hydraulic motor, wheel and flangettes to the
front fork.
10.Apply Loctite #242 (or equivalent) to bearing locking
collar set screw. Install set screw to locking collar and
torque from 90 to 120 in–lb (10.2 to 13.6 N–m).
IMPORTANT: When securing wheel motor and flan-
gettes to fork, tighten wheel motor fasteners before
tightening flangette fasteners.
11.Position hydraulic tube clamps to tubes and castor
fork. Secure clamps with cap screws, cover plates and
lock nuts.
8.
flangettes to fork. Make sure flangettes and wheel motor
fit snugly to the fork.
Carefully lower machine to align wheel motor and
A. Secure hydraulic motor to the front fork with two
(2)
socket head screws and lock nuts.
B. Secure flangettes to the fork with cap screws,
bearing tab and lock nuts.
Chassis
Page 6 – 6
Sand Pro & Infield Pro 3040/5040
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro 3040, Toro 5040 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)