4.
Remove rear attachment from machine.
3
1
CAUTION
The engine and exhaust system may be hot. To
avoid possible burns, allow the engine and ex-
haust system to cool before removing engine
from machine.
2
4
5.
Remove hitch assembly from the rear of the machine
(see Hitch Assembly Removal in the Service and Re-
pairs section of Chapter 6 – Chassis).
Figure 10
1.
2.
Violet wire (magneto)
Fusible link (voltage reg.)
3.
4.
Voltage regulator
Yellow wire
6.
Raise operator seat.
4
CAUTION
3
1
When disconnecting the battery cables from the
battery, make sure to remove the negative (–) bat-
tery cable first and then remove the positive (+)
battery cable.
2
7.
Disconnect and remove battery from the machine to
prevent the possibility of the engine damaging it during
removal (see Battery Service in the Service and Repairs
section of Chapter 5 – Electrical Systems).
Figure 11
8.
engine to prevent fuel spillage. Loosen hose clamp at
fuel pump and remove fuel hose from the pump.
Close fuel shutoff valve. Clamp fuel hose near
1.
2.
Throttle control cable
3.
4.
Choke cable
Choke lever
Governor control plate
9.
Disconnect machine wire harness from engine as
follows (Fig. 10):
2
5
A. Disconnect harness violet wire from engine mag-
neto terminal.
7
2
B. Disconnect harness fusible link from voltage reg-
ulator on engine blower housing.
8
6
C. Disconnect harness yellow wire from engine fuel
solenoid lead.
1
3
10.Remove
air intake hose from air cleaner assembly
Antiseize
Lubricant
and engine intake elbow (see Air Cleaner Assembly Re-
moval in this section).
4
5
6
Loctite #242
to 110 in–lb
to 12.4 N–m)
90
11.
Disconnect breather tube from intake elbow.
four (4) flange head screws that secure in-
(10.2
12.Remove
Figure 12
take elbow to carburetor. Remove two (2) gaskets and
intake manifold. Discard gaskets. Remove and discard
intake gasket from between intake elbow and carbure-
tor. Make sure that all gasket material is removed from
carburetor and intake elbow.
1.
2.
3.
4.
Square key
Cap screw
Set screw
Engine hub
5.
6.
7.
8.
Coupling spacer
Lock nut
Drive coupling
Coupling
Sand Pro & Infield Pro 3040/5040
Page 3 – 11
Gasoline Engine
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro 3040, Toro 5040 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)