Toro 06147SL Rev A Sand Pro Field Pro 3040 5040 Service Manual

Removal (Fig. 7)
Park machine on a level surface, lower attachment,
Installation (Fig. 7)
1.
stop engine and remove key from ignition switch.
CAUTION
2.
3.
ground  and  support  machine  with  blocking  or  jack
stands (see Operator’s Manual and Jacking Instructions
in Chapter 1 – Safety).
Make sure parking brake is disengaged.
Be careful  when installing  extension spring  to
parking latch  pivot. The  spring is under  heavy
load and may cause personal injury.
Block front wheel. Jack or hoist rear of machine from
1.
Install  removed parking  brake  components  using
Figure 7 as a guide.
4.
Remove rear wheel assembly (see Rear Wheel Re-
moval in this section).
2.
If wheel hub was removed:
A.  Make sure that wheel motor shaft and wheel hub
taper are thoroughly cleaned.
CAUTION
B.  Position woodruff key into wheel motor shaft.
Be careful when removing extension spring from
parking  brake  bellcrank.  The  spring  is  under
heavy load and may cause personal injury.
C. Install wheel hub assembly to wheel motor shaft
and secure with nut. Torque nut from 200 to 400 ft–lb
(271
to 542 N–m).
5.
ing Figure 7 as a guide.
Remove parking brake components as needed  us-
3.  Install wheel assembly (see Rear Wheel Installation
in this section).
6.
wheel hub for excessive wear or damage. Replace any
damaged parts.
Clean all parts. Inspect brake bar and brake lugs on
4.
Lower machine to ground.
7.
If wheel hub requires removal:
A.  Loosen, but do not remove, lock nut that secures
wheel hub to wheel motor shaft.
3
1
4
IMPORTANT: DO NOT hit  wheel hub, wheel hub
puller  or  wheel  motor with  a  hammer  during
wheel hub  removal or  installation. Hammering
may cause damage to the wheel motor.
B.  Using  hub  puller  (see  Special  Tools),  loosen
wheel hub from wheel motor. Remove hub puller.
5
2
C. Remove lock nut and wheel hub from motor shaft.
Locate and retrieve woodruff key.
Figure 8
1.
2.
3.
Extension spring
Brake cable
LH brake rod
4.
5.
Bellcrank
RH brake rod
Sand Pro & Infield Pro 3040/5040
Page 6 – 13
Chassis
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 152 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website