Toro 06147SL Rev A Sand Pro Field Pro 3040 5040 Service Manual

5.
Wheel Removal in the  Service and Repairs section of
Chapter 6 – Chassis).
Remove  left rear  wheel  from machine  (see  Rear
2
1
3
6.
Installing Hydraulic System Components at  the begin-
ning of the Service and Repairs section of this chapter.
Read the  General  Precautions for  Removing and
7.
hydraulic tank to prevent hydraulic system  contamina-
tion.
Thoroughly clean hydraulic hose ends and fittings on
8.
Label all hydraulic connections on hydraulic tank for
assembly purposes.
9.
low hoses to drain into a suitable container.
Disconnect hydraulic hoses from hydraulic tank. Al-
Figure 31
3.
10.Put
to prevent contamination.
caps or plugs on disconnected hoses and fittings
1.
2.
Center shroud
Cap screw (2 used)
Flat washer (2 used)
11.
Remove three (3) tank clamps (items 10 and 12) that
secure hydraulic tank to the frame.
12.Remove
hydraulic tank from machine.
13.If
hydraulic fittings are to be removed from hydraulic
tank, mark fitting orientation to allow correct assembly.
Remove fittings from tank.
Installation (Fig. 30)
1.
If fittings were  removed from hydraulic tank, install
fittings with new o–rings to tank using marks made dur-
ing the removal process to properly orientate fittings.
2.
3.
Position hydraulic tank to machine frame.
Secure hydraulic  tank to frame  with three (3)  tank
clamps (items 10 and 12).
4.
Remove caps or plugs from disconnected hydraulic
lines and fittings.
5.
Use labels placed during the removal process to proper-
ly install hoses to tank.
Connect hydraulic lines to fittings on hydraulic tank.
6.
Installation in the Service and Repairs section of Chap-
ter 6 – Chassis).
Install left rear  wheel to machine (see Rear  Wheel
7.
Install new hydraulic oil filter (see Operator’s Manu-
al).
8.
(2)
Position center shroud to frame and secure with two
cap screws and flat washers (Fig. 31).
9.
Fill hydraulic tank with correct hydraulic oil (see Op-
erator’s Manual).
Sand Pro & Infield Pro 3040/5040
Page 4 – 39
Hydraulic System
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 152 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website