4.
piston by carefully twisting and pulling on the shaft.
Remove plugs from ports. Extract shaft, head and
3. Mount shaft securely in a vise by clamping on the cle-
vis of the shaft.
IMPORTANT: Do not clamp vise jaws against the
shaft surface. Clamp on the clevis ONLY.
A. Coat shaft with clean hydraulic oil.
B. Slide head onto the shaft.
5.
vis of the shaft. Remove lock nut and piston from the
shaft. Carefully slide head off the shaft.
Mount shaft securely in a vise by clamping on the cle-
C. Install piston onto the shaft and secure with nut.
D. Remove shaft assembly from the vise.
6.
move seal and o–ring from the piston.
Taking care to not scratch or damage the piston, re-
IMPORTANT: Prevent damage when clamping the
hydraulic cylinder into a vise; clamp on the clevis
end of the barrel ONLY.
7.
Taking care to not scratch or damage the head, re-
move o–ring, back–up seal, rod seal and dust seal from
the head.
4.
clevis end of the barrel.
Mount barrel securely in a vise by clamping on the
Assembly (Fig. 52)
IMPORTANT: When installing the head into the bar-
rel, pay careful attention to the retaining ring slot in
the barrel to insure that the backup ring does not
lodge in the slot.
1.
Make sure all cylinder parts are clean before as-
sembly.
2.
clean hydraulic oil.
Coat new o–rings, back–up ring and other seals with
5.
draulic oil. Slide piston, shaft and head assembly into
the barrel being careful not to damage the seals.
Coat all internal parts with a light coat of clean hy-
A. Carefully install seal and o–ring to the piston.
B. Carefully install rod seal, o–ring, back–up seal
and dust seal to the head.
6. Secure head in barrel by installing retaining ring.
Align retaining ring hole in the head with the access slot
in the barrel. Insert the retaining ring hook into the hole
and rotate head clockwise until the retaining ring is com-
pletely pulled into the barrel and the ring ends are cov-
ered.
IMPORTANT: Do not clamp vise jaws against the
shaft surface. Clamp on the clevis ONLY.
Sand Pro & Infield Pro 3040/5040
Page 4 – 63
Hydraulic System
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro 3040, Toro 5040 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)