9.
Remove clamp from fuel hose that was used to prevent
fuel spillage. Open fuel shutoff valve.
Secure fuel hose to the fuel pump with hose clamp.
12.Secure air intake hose to air cleaner assembly and
engine (see Air Cleaner Assembly Installation in this
section). Make sure that hose clamps are properly tight-
ened.
10.Place
new intake gasket on carburetor. Position in-
take elbow to top of carburetor. Place two (2) gaskets to
top of intake elbow and secure intake elbow with four (4)
flange head screws. Torque cap screws from 60 to 65
in–lbs (6.8 to 7.3 N–m).
13.Install hitch assembly to the rear of the machine (see
Hitch Assembly Installation in the Service and Repairs
section of Chapter 6 – Chassis).
14.Install
15.Lower
attachment to the machine.
operator seat.
IMPORTANT: Any leaks in the air filter system will
allow dirt into engine and will cause serious engine
damage. Make sure that all air cleaner components
and breather tube are in good condition and are
properly secured during assembly.
16.Check
Manual).
and adjust engine oil level (See Operator’s
17.Check
if necessary (see Operator’s Manual).
operation of choke and throttle cables. Adjust
11.
hose clamps are properly tightened.
Secure breather tube to intake elbow. Make sure that
Sand Pro & Infield Pro 3040/5040
Page 3 – 13
Gasoline Engine
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro 3040, Toro 5040 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)