Toro 10177SL Models 30449 30447 Groundsmaster 4100 4110 D Service Manual

Removal (Fig. 65)
Park machine on a level surface, lower cutting deck,
stop engine,  engage parking  brake  and remove  key
from the ignition switch.
Installation (Fig. 65)
1.
1.  If fittings  were removed from  motor, lubricate  and
place new O--rings onto fittings. Install fittings into port
openingsusingmarksmadeduringtheremovalprocess
to properly  orientate fittings. Tighten  fittings (see Hy-
draulic  Fitting Installation  in the  General Information
section of this chapter).
2.
Installing Hydraulic System Components at the begin-
ning of the Service and Repairs section of this chapter.
Read the  General Precautions  for Removing  and
2.
Ifremoved,installpiniongear(item10)toaxlemotor.
NOTE:  Toeaseinstallation,labelthehydraulichosesto
show their correct position on the axle motor.
3.  Install O--ring (item 6) onto motor. Position motor to
rear axle assembly making sure that arrows on the side
of motor case point upward. Align gear teeth and slide
motor into place.
3.
Disconnect hydraulic hoses from motor. Put caps or
plugs on fittings and hose openings to prevent contami-
nation.
4.
ers. Torque screws from 59 to 73 ft--lb (80 to 99 N--m).
Secure motor to axle with cap screws and flat wash-
IMPORTANT: Support axle motor to prevent motor
from falling during removal.
5.
Remove plugs from fittings and hose openings. Us-
4.
guide.
Remove motor from rear axle using Figure 65 as a
inglabelsplacedduringaxlemotorremoval,properlyat-
tach hydraulic hoses to axle motor (see Hydraulic Hose
and Tube Installation in the General Information section
of this chapter).
5.
mark fitting orientation  to allow correct assembly. Re-
move fittings from motor and discard O--rings.
If hydraulic  fittings are to be  removed from motor,
6.
Fill reservoir with hydraulic fluid as required.
7.
hoses and fittings do not contact anything.
After assembly  is completed,  verify that  hydraulic
Groundsmaster 4100--D/4110--D
Page 4 -- 93
Hydraulic System
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags, , , ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 340 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website