Removal (Fig. 1)
Position machine on a clean, level surface. Lower
1.
cutting deck, stop engine, engage parking brake and re-
move key from the ignition switch.
2
1
NOTE: Removal of clevis pins from deck and height--
of--cut chains is easier if deck is lifted slightly.
2.
height--of--cut chains to the rear of the cutting deck (Fig.
2).
Remove hairpins and clevis pins that secure the
3.
Remove hydraulic motors from cutting deck (see
Figure 2
Cutting Deck Motor Removal in theService andRepairs
Section of Chapter 4 -- Hydraulic System). Position mo-
tors away from cutting deck.
1.
Hairpin and clevis pin
2.
Height--of--cut chain
1
4.
Remove hairpins and clevis pins that secure damp-
erstoliftarms(Fig.3).Rotatedampersandplaceoncut-
ting deck.
4
2
5.
Remove hydraulic hoses from wing deck lift cylin-
ders (Fig. 4):
A. Remove deck covers to allow access to wing
deck lift cylinders.
3
B. Thoroughly clean exterior of wing deck lift cylin-
ders and fittings. For assembly purposes, label hy-
draulic hoses to show their correct position on the lift
cylinders.
Figure 3
C. Disconnect hydraulic hoses from wing deck lift
cylinders. Cap hoses and fittings to preventcontami-
nation.
1.
2.
Lift arm
Castor arm
3.
4.
Support hub
Damper
6
6.
chine harness (Fig. 5).
Disconnect cutting deck wire harness from mainma-
160
to 180 ft--lb
6
1
(217 to 244 N--m)
7.
that secure support hubs to cutting deck castor arms
(Fig. 3).
Remove cap screws, flat washers and flange nuts
5
4
8.
Slide the cutting deck away from the traction unit.
Installation (Fig. 1)
Position machine on a clean, level surface. Lower lift
2
3
1.
arms, stop engine, engage parking brake and remove
key from the ignition switch.
2.
Position the cutting deck to the lift arms.
3.
cure with cap screws, flat washers and flange nuts (Fig.
3). Torque flange nuts from 75 to 85 ft--lb (102 to 115
Alignsupporthubtocuttingdeckcastorarmsandse-
Figure 4
N--m).
1.
2.
3.
Wing deck lift cylinder
Flat washer
4.
5.
6.
Lock nut
Cap screw
Spacer
Lock nut
Groundsmaster 4100--D/4110--D
Page 8 -- 7
Cutting Deck
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 10177SL, Toro Groundsmaster 30447, Toro Groundsmaster 30449, Toro Groundsmaster 4100, Toro Groundsmaster 4110 D |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)