5.
Remove valve lever (5) from the control valve (1).
Unsnap and remove connecting link assembly (28).
1. Disconnect hose connection (9) from hydraulic tee
fitting (7). Allow hose to drain hydraulic oil into a suitable
container.
6.
connect tube (18) from 90o hydraulic fitting (8).
Disconnect tube (21) from hydraulic fitting (7). Dis-
2. Disconnect tube (21) from hydraulic tee fitting (7). Al-
low fitting to drain into a suitable container.
7.
Remove hydraulic fittings (7, 8, 19, and 22) and O–
rings from the control valve (1).
3. Remove lift relief valve body (27) and hydraulic tee
fitting (7) from tube (18).
Control Valve Installation (Fig. 55)
4.
O–rings from the lift relief valve body (27).
Remove hydraulic tee fitting (7), tube (21), and both
1.
rings to the control valve (1).
Install hydraulic fittings (7, 8, 19, and 22) and new o–
Lift Relief Valve Installation (Fig. 55)
2.
(18)
Install tube (21) to hydraulic fitting (7). Connect tube
to 90o hydraulic fitting (8).
NOTE: This procedure may be used if only the lift relief
valve has been removed from the unit.
3.
Install valve lever (5) to the control valve (1) by snap-
ping the connecting link assembly (28) to the valve lever
and control valve.
1. Install hydraulic tee fitting (7) with new O–ring to the
lift relief valve body (27).
4.
lever onto support bracket pin.
Position control valve (1) to machine and slide valve
2. Install tube (21) with new O–ring to the lift relief valve
body (27).
5.
(1).
Slide cap screw (4) with flat washer into control valve
Secure control valve with lock nuts (2) and valve le-
3. Set lift relief valve body (27) with attached fitting and
tube into the unit.
ver with lock nut (13).
4.
5.
Connect tube (21) to hydraulic tee fitting (7).
Connect tube (18) to hydraulic tee fitting (7).
Connect hose connection (9) to hydraulic tee fitting
6.
Connect hose connections (3, 9, and 11) to hydraulic
fittings (7 and 19) and tube connection (23) to fitting (22).
Tighten connections.
6.
(7).
Lift Relief Valve Removal (Fig. 55)
7.
Follow Hydraulic System Start–up procedures.
NOTE: This procedure may be used if only the lift relief
valve needs removal from the unit.
Reelmaster 2000–D
Page 4 – 77
Hydraulic System
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Reelmaster 2000-D |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5) Lawn and Garden readers have rated Toro 02103SL Rev A Reelmaster 2000 D Service Manual 5.0 out of 5.0 based on 1 product reviews.
Really needed this manual. Amazing that Toro would make it so easily available. Full of details.