Bedknife Replacement and Grinding
1.
Remove bedbar from the cutting unit (see Bedbar
Removal).
2.
3.
Remove bedknife screws and bedknife.
Remove all rust, scale and corrosion from the bedbar
surface before installing new bedknife.
NOTE: Use a torque wrench and a bedknife screw tool
to install bedknife screws.
4.
Install new bedknife as follows:
A. Make sure bedbar threads are clean.
B. Use new bedknife screws. Apply anti–seize lubri-
cant to the screw threads before installing.
11 9
7
5
3
1
2
4
6
8 10 12
IMPORTANT: Do not use an air or manual impact
wrench to tighten bedknife screws.
Figure 10
C. Tighten screws to a torque of 250 to 300 in–lb
(28
to 34 N–m). Tighten screws from the center to-
ward each end of the bedbar (Fig. 10).
Top Face
5.
Since there can be variations in the mounting sur-
Relief Angle
face of the bedbar, a new bedknife will not be perfectly
flat after it is installed. It is therefore necessary to back-
lap or grind a new bedknife after installing it to the bed-
bar. Follow the existing angle that was ground into the
bedknife and grind only enough to make sure the top
surface is true.
Front
Face
Front Angle
Figure 11
6.
Install bedbar to the cutting unit (see Bedbar Installa-
tion).
Regrinding Bedknife
Remove bedbar assembly from cutting unit before at-
tempting to regrind a used bedknife (see Bedbar Re-
moval).
NOTE: When grinding, be careful to not overheat the
bedknife. Remove small amounts of material with each
pass of the grinder.
NOTE: If the height of cut is 1/2 inch (13mm) or lower
on the cutting unit, the front angle can be increased to
30
o for improved performance.
Bedknife Regrinding Specifications
Relief Angle
5o
3o to 6o
Relief Angle Range
Front Angle
15o (see NOTE above)
13o to 17o
Front Angle Range
Cutting Units
Page 7 – 12
Reelmaster 2000–D
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Reelmaster 2000-D |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5) Lawn and Garden readers have rated Toro 02103SL Rev A Reelmaster 2000 D Service Manual 5.0 out of 5.0 based on 1 product reviews.
Really needed this manual. Amazing that Toro would make it so easily available. Full of details.