Removal (Fig. 9)
Park machine on a level surface, lower cutting units,
stop engine, engage parking brake, and remove key
from the ignition switch.
Installation
1.
1. Install any removed brackets or shrouds to radiator
using Figure 9 as a guide.
2.
Remove any plugs used during the removal proce-
2.
Open and remove the hood (see Traction Unit Oper-
dure.
ator’s Manual).
3.
Carefully position radiator assembly to the frame.
Secure radiator with two carriage screws and flange
nuts at the front radiator bracket and four cap screws
and flange nuts at the rear radiator bracket.
CAUTION
Do not open radiator cap or drain coolant if the
radiator or engine is hot. Pressurized, hot cool-
ant can escape and cause burns.
4. Position and secure oil cooler to front radiator brack-
et.
IMPORTANT: Make
doesn’t contact fan belt after assembly.
sure
lower
radiator
hose
Ethylene–glycol antifreeze is poisonous. Dis-
pose of coolant properly, or store it in a properly
labeled container away from children and pets.
5.
6.
Connect hoses (upper and lower) to the radiator.
Make sure radiator drain plug is tight. Fill radiator
3.
Drain coolant from radiator.
with coolant (see Traction Unit Operator’s Manual).
A. Slowly remove radiator cap from the radiator.
7.
Install hood on the machine.
B. Place drain pan below the radiator drain plug lo-
cated on the bottom of the radiator. Remove plug
and allow coolant to drain.
4.
Loosen knobs that secure oil cooler to front radiator
bracket. Unhook and position oil cooler assembly away
from radiator.
5.
Disconnect radiator hoses (upper and lower) from
the radiator.
6.
Support the radiator assembly before loosening
mounting fasteners.
7.
Remove two carriage screws and flange nuts secur-
ing the front radiator bracket to the frame. Remove four
cap screws and flange nuts securing the rear radiator
bracket to the frame.
8.
Carefully pull radiator assembly from the machine.
Plug radiator and hose openings to prevent contamina-
tion.
9.
As required, remove brackets and shrouds from ra-
diator using Figure 9 as a guide.
Reelmaster 2000–D
Page 3 – 13
Engine
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Reelmaster 2000-D |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5) Lawn and Garden readers have rated Toro 02103SL Rev A Reelmaster 2000 D Service Manual 5.0 out of 5.0 based on 1 product reviews.
Really needed this manual. Amazing that Toro would make it so easily available. Full of details.