Toro 02103SL Rev A Reelmaster 2000 D Service Manual

7.
Remove cotter pin (28) from the yoke  pin (21). Re-
move yoke pin from the brake lever  (22) and separate
yoke (23) from the brake lever (Fig. 4).
8.
Remove cap screws (9) and lock nuts (6) holding the
backing plate  (36)  and brake  grass shield  (8)  to the
brake bracket.
9.
brake grass shield (15) from the brake bracket.
Remove backing  plate (29),  flat  washers (7),  and
2
10.If
(30),
brake lever (22) is removed from brake cam shaft
match mark lever and shaft before disassembly to
allow for correct reassembly alignment.
3
1
11.
Remove rust from all parts with a wire brush prior to
installation. Clean all parts. Inspect brake shoe contact
surfaces of the brake drum for excessive wear. Replace
any worn or damaged parts.
Figure 4
1.
2.
Brake lever
Yoke
3.
Yoke pin
Installation
1.
If brake lever  was removed from  brake cam shaft,
apply anti–seize lubricant to splines of cam shaft before
installing brake lever.
2.
Secure flat washers (7), brake grass shield (15), and
backing plate  (29)  to the  brake bracket  with the  cap
screws (9) and lock nuts (6). Tighten fasteners.
3.
Connect brake  lever  (22) to  the yoke  (23). Install
yoke pin (21) through the brake lever and yoke.  Install
and lock cotter pin (28) into the yoke pin (Fig. 4).
4.
Install brake shoes (32) onto the backing plate (29).
Install brake return springs (31) into the holes on each
end of the brake shoes. Springs  should be installed in
opposite directions of each other.
5.
Mount key (34) in the wheel motor shaft, then install
the wheel hub (11) and brake drum (12) onto the wheel
motor shaft.
6.
Install the lock nut  (14) onto the wheel motor  shaft
and torque from 250 to 400 ft–lb (339 to 542 N–m).
7.
Check and adjust brakes (see Traction Unit Opera-
tor’s Manual).
8.
Check operation of brake switch (see  Traction Unit
Operator’s Manual).  Adjust brake  switch if necessary
(see Adjustments in Chapter 5 – Electrical System).
9.
Install  wheel assembly  and secure  with  lug nuts.
Tighten lug nuts evenly in a crossing pattern to a torque
from 45 to 65 ft–lb (61 to 88 N–m).
Reelmaster 2000–D
Page 6 – 9
Chassis
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 208 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(1 votes, average: 5 out of 5)
Lawn and Garden readers have rated Toro 02103SL Rev A Reelmaster 2000 D Service Manual 5.0 out of 5.0 based on 1 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

Toro 02103SL Rev A Reelmaster 2000 D Service Manual SKU UPC Model
Krista Renzo on Nov 19, 2016.

Really needed this manual. Amazing that Toro would make it so easily available. Full of details.


Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website