Lift Circuit
The charge pump is part of the traction pump and is di-
rectly coupled to it. It supplies hydraulic pressure for
raising and lowering cutting units and maintaining 100
to 150 PSI to the low pressure side of the traction circuit
(piston pump). The charge pump takes its suction
through a filter from the reservoir.
of the control valve to the lower and outer portions of the
lift cylinders. Hydraulic pressure against the cylinder
pistons pushes the shafts out. At the same time, the pis-
tons push the hydraulic fluid in the upper and inner por-
tions of the lift cylinders out and through the control valve
to the piston pump suction. When the control valve lever
is released, spring action returns the spool to the center
position and by–passes flow back to the piston pump
suction. Lift cylinder movement is stopped. The cylinder
position is locked in place since there is no complete cir-
cuit of flow to and from the lift cylinders.
During conditions of not lifting or lowering cutting units,
flow from the charge pump goes to the lift control valve
and is by–passed (Fig. 8) directly to the suction of the
piston pump and the charge relief valve.
Maximum lift/lower circuit pressure (475 PSI) is limited
by a relief valve in the lift relief manifold located near the
lift control valve.
Lower Cutting Units
Circuit operation for lowering the lift cylinders is similar
to raising them. However, the control valve spool is
shifted up and flow is reversed to and from the lift cylin-
ders (Fig. 8), thus moving the cutting units down.
Raise Cutting Units
When the cutting units are to be raised, the control valve
spool is positioned down and flow is directed out the top
LIFT CIRCUIT (NEUTRAL POSITION)
LIFT CIRCUIT (LOWER)
Figure 8
Reelmaster 2000–D
Page 4 – 11
Hydraulic System
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Reelmaster 2000-D |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Lawn and Garden readers have rated Toro 02103SL Rev A Reelmaster 2000 D Service Manual 5.0 out of 5.0 based on 1 product reviews. Really needed this manual. Amazing that Toro would make it so easily available. Full of details.