Procedure for Mow Circuit Working Pressure Test:
Make sure hydraulic oil is at normal operating tem-
1.
perature by operating the machine for approximately 10
minutes.
1
2.
Park machine on a level surface with the cutting units
lowered and off. Make sure engine is off.
3.
4.
Read Precautions For Hydraulic Testing.
Connect pressure test gauge with a hydraulic hose
attached to the reel circuit test port on the hydraulic man-
ifold (Fig. 18). Make sure gauge hose is long enough so
the operator can read gauge while driving the machine.
2
5.
Make sure backlap knob on the hydraulic manifold is
Figure 18
in the mow position. Adjust reel speed knob for typical
mowing conditions.
1.
Hydraulic manifold
2.
Test port
CAUTION
Keep away from reels during test to prevent per-
sonal injury from the rotating reel blades.
6.
50
Start engine and move throttle to full speed (3200 +
RPM). Engage the cutting units.
7.
Watch pressure gauge carefully while mowing with
the machine.
8.
9.
Reel circuit pressure should be about 600 PSI.
Disengage cutting units. Shut off engine.
10.Disconnect
port.
test gauge with hose from manifold test
Reelmaster 2000–D
Page 4 – 23
Hydraulic System
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Reelmaster 2000-D |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5) Lawn and Garden readers have rated Toro 02103SL Rev A Reelmaster 2000 D Service Manual 5.0 out of 5.0 based on 1 product reviews.
Really needed this manual. Amazing that Toro would make it so easily available. Full of details.