Safety Instructions
The Reelmaster 2000--D has been tested and certified
by TORO for compliance with existing safety standards
and specifications as specified in the Traction Unit Op-
erator’s Manual. Although hazard control and accident
prevention partially are dependent upon the design and
configuration of the machine, these factors are also de-
pendent upon the awareness, concern, and proper
trainingof thepersonnelinvolvedintheoperation,trans-
port, maintenance, andstorage of the machine. Improp-
eruseormaintenanceof themachinecanresult ininjury
or death. To reduce the potential for injury or death,
comply with the following safety instructions.
WARNING
To reduce the potential for injury or death,
comply with the following safety instructions.
Before Operating
1.
Read and understand the contents of the Operator’s
4. Since diesel fuel is highly flammable, handle it care-
fully:
Manual before starting and operating the machine. Be-
comefamiliarwiththecontrolsandknow howto stopthe
machine and engine quickly. Additional copies of the
Operator’s Manual are available on the internet at
www.Toro.com.
A. Store fuel in containers specifically designed for
this purpose.
B. Do not remove machine fuel tank cap while en-
gine is hot or running.
2.
Keep all shields, safety devices, and decals in place.
If a shield, safety device, or decal is defective, illegible
or damaged, repair or replace it before operating the
machine. Also tighten any loose nuts, bolts or screws to
ensure machine is in safe operating condition.
C. Do not smoke while handling fuel.
D. Fill fuel tank outdoorsand onlyto withinan inchof
the top of the tank, not the filler neck. Do not overfill.
3.
engine cannot be started unless traction pedal is in
NEUTRAL and cutting units are DISENGAGED.
Assure interlock switches are adjusted correctly so
E. Wipe up any spilled fuel.
While Operating
1.
chine.
Sit on the seat when starting and operating the ma-
5. Before getting off the seat:
A. Ensure that traction pedal is in neutral.
B. Set parking brake.
2.
Before starting the engine:
A. Engage the parking brake.
C. Disengage cutting units and wait for blades to
stop.
B. Make sure traction pedal is in neutral and the
PTO switch is OFF (disengaged).
D. Stop engine and remove keyfrom ignitionswitch.
C. After engine isstarted, releaseparking brakeand
keep foot off traction pedal. Machine must not move.
If movement is evident, the traction pedal linkage is
adjusted incorrectly; therefore, shut engine off and
adjust traction pedal linkage until machine does not
move when traction pedal is released.
E. Anytime the machine is parked (short or long
term), the cutting units should be lowered to the
ground. This relieves pressure from the lift circuit
and eliminates the risk of cutting units accidentally
lowering to the ground.
F. Donot parkonslopes unlesswheels arechocked
or blocked.
3.
quate ventilation. Exhaust fumes are hazardous and
could possibly be deadly.
Do not run engine in a confined area without ade-
4.
engine is running or soon after it is stopped. These
Do not touch engine, muffler or exhaust pipe while
areas could be hot enough to cause burns.
Safety
Page 1 -- 2 Rev. A
Reelmaster 2000--D
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Reelmaster 2000-D |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Lawn and Garden readers have rated Toro 02103SL Rev A Reelmaster 2000 D Service Manual 5.0 out of 5.0 based on 1 product reviews. Really needed this manual. Amazing that Toro would make it so easily available. Full of details.