Adjust Front Ride Height
1.
chine on a level surface, stop engine, set parking brake,
and remove key from the ignition switch.
If front ride height adjustment is needed, park ma-
1
2
WARNING
Before jacking up the machine, review and follow
Jacking Instructions in Chapter 1 – Safety.
4
2.
3.
4.
Jack front end of the vehicle off the ground.
Remove travel limiting bolt (Fig. 5).
3
2
240
to 290 ft–lb
to 393 N–m)
(325
Loosen centering bolts (front and rear) in the A–arm
Figure 5
3.
4.
(Fig. 5).
1.
2.
Travel limiting bolt
Centering bolt
A–arm
Ride height adj. bolt
5.
Remove ride height adjustment bolt (Fig. 6).
NOTE: The A-arms suspension inserts are made with
rubber and have different spring rates. Because of the
different spring rates, the A-arms come adjusted from
the factory based on that spring rate. Generally, the ride
height adjustment bolts will be installed in hole number
1
2,
3, or 4 (Fig. 7) and it may be different from the left side
(driver side) to the right side (passenger side). If the A-
arms look like they are sagging, then they should be ad-
justed to the next higher number (Fig. 7). Each hole
equals about 3/4 inch (19 mm) of adjustment at the
wheel. Ride height should be adjusted to the next higher
position when adding heavy attachments or carrying
heavy loads often.
2
135
to 165 ft–lb
(183
to 224 N–m)
Figure 6
2.
1.
Ride height adj. bolt
A–arm
6.
Rotate A–arm to the desired position and replace
ride height adjustment bolt.
7.
135
Tighten and torque ride height adjustment bolt from
to 165 ft-lb (183 to 224 N–m).
6
1
7
0 8
4
2
3
NOTE: To reinstall the travel limiting bolt, it may be nec-
essary to lower the machine to the ground.
5
8.
9.
Replace travel limiting bolt (Fig. 5 and 6).
Tighten and torque centering bolts from 240 to 290
ft-lb (325 to 393 N–m).
procedure on opposite side of the vehicle.
Recheck front ride height.
1
10.Repeat
11.
12.After
front ride height is adjusted, check and adjust
front wheel toe–in (see Adjust Front Wheel Toe–in).
Figure 7
1.
Front A–arm (LH shown)
Chassis, Wheels, and Brakes (Rev. B)
Page 7 – 10
Workman 1100/1110/2100/2110
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Workman 1100, Toro Workman 1110, Toro Workman 2100, Toro Workman 2110 |
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)