Toro 02110SL Rev D Service Manual Workman 1100 1110 2100 2110 Preface Publication

Removal
1.
Park machine  on a level  surface, stop engine,  set
parking brake, and remove key from the ignition switch.
4
5
6
7
2.
Remove drive belt from the drive clutch (see Service
Drive Belt in Engine Chapter).
3
2
3.
pulley (see  Replace Starter/Generator  Belt in  Engine
Chapter).
Remove  starter/generator V–belt  from the  engine
1
8
4.
Remove plastic cap carefully from the drive clutch.
25
to 30 ft–lb
5.
Remove cap screw  and washer securing the  drive
(34 to 41 N–m)
clutch to the engine tapered shaft.
Figure 9
1.
2.
3.
4.
Cap screw
Washer
Drive clutch
Cap screw
5.
6.
7.
8.
Lock washer
IMPORTANT: Grease  end  of  clutch  removal  tool
lightly to  prevent wear. Prevent  damage to  clutch
threads;  thread  tool only  enough  to  remove  the
clutch.
Engine starter pulley
Starter spacer
Plastic cap
6.
Use clutch  removal tool (see  Special Tools)  to re-
move drive clutch from the engine tapered shaft.
7.
If necessary,  the  engine starter  pulley can  be re-
moved from the drive clutch. Remove four cap  screws
and lock washers securing the pulley and starter spacer
to the clutch.
Installation
1.
Install engine pulley to the drive clutch as follows:
A.  Insert  four  cap  screws  through  lock  washers
pulley, and spacer.
B.  Apply  Loctite  Blue  #242 or  equivalent  to  the
threads of the cap screws.
C. Secure  pulley  and starter  spacer to  the clutch
with cap screws.
2.
Slide drive clutch onto the tapered engine shaft.
A.  Apply  Loctite  Blue  #242 or  equivalent  to  the
threads of the cap screw.
B.  Secure clutch to shaft with cap screw and washer.
Torque cap screw from 25 to 30 ft–lb (34 to 41 N–m).
3.
4.
Install plastic cap carefully to the drive clutch.
Install  starter/generator V–belt  to  the engine  and
starter pulley and adjust (see  Install Starter/Generator
Belt and Adjust Starter/Generator Belt in Engine Chap-
ter).
5.
Install drive belt to the drive clutch (see Service Drive
Belt in Engine Chapter).
Workman 1100/2100/2110
Page 5 – 9
Drive Train
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags, , ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 194 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website