Toro 02110SL Rev D Service Manual Workman 1100 1110 2100 2110 Preface Publication

Engine Installation (Fig. 17)
If removed, install engine parts and attachments  to
7.  Install drive belt (see Service Drive Belt).
1.
8.  Install muffler  and coupler to the  exhaust manifold
(see Muffler Removal).
the engine.
9.
Connect fuel hose to the fuel pump (Fig. 18).
the following components:
CAUTION
10.Connect
One person should operate the chain fall or hoist
while the other person guides the engine into the
frame.
IMPORTANT: Make sure all hoses and engine open-
ing plugs are removed.
A.  Choke and throttle cables to the carburetor  and
cable bracket.
2.
Install engine to the frame.
A.  Attach  a  short section  of  chain  between  fuel
pump bracket  lift hole  and  exhaust manifold  (Fig.
18).
B.  Air intake hose to the carburetor.
C. Breather hose to the engine valve cover.
11.
bracket with cable tie.
Secure choke and  throttle cables to the  fuel pump
B.  Connect a hoist or chain fall at the center of the
short section of chain.
12.Connect
connect ground (black) cable to the battery.
positive (red)  cable to  the battery.  Then,
IMPORTANT: Make sure not to damage engine, fuel
lines, electrical harness, or other parts while instal-
ling the engine.
13.Install
cargo bed to the  frame (see Cargo Bed and
Tailgate Installation – Chapter 7).
C. Lower engine into the engine mount.
14.Make
gine Oil).
sure engine oil level is correct (see Check En-
3.
cure engine to  the engine mount with four  flange lock
nuts and flange head screws.
Route ground cables to proper mounting point. Se-
15.When
following:
starting a new or repaired engine, observe the
4.
Connect engine harness connector to the main har-
ness connector.
A.  After starting  a cold  engine, let  it warm  up for
about 15 seconds before applying any load to it.
5.
6.
Install starter bracket to the engine and frame.
B.  Check engine oil level regularly. Be alert for con-
ditions of overheating.
Install V–belt  to  the engine  and starter/generator.
Tension and adjust the V–belt (see Adjust Starter/Gen-
erator Belt).
Kohler Gasoline Engine
Page 4 – 16
Workman 1100/1110
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags, , ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 194 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website