Spark Plug
Note:
terval specified in the Operator’s Manual or Chapter 2
Perform this maintenance procedure at the in-
5. Check condition of side electrode, center electrode,
and center electrode insulator for damage.
–
Product Records and Maintenance.
6.
Set air gap between center and side electrodes at
Type: Champion RC 14YC (or equivalent)
Air Gap: 0.030 inch (0.76 mm)
0.030” (0.76 mm). Install correctly gapped spark plug
and tighten plug to 14 ft-lb (20 N–m).
Note:
A spark plug usually lasts a long time; however,
7. Install spark plug wire.
the plug should be removed and checked whenever the
engine malfunctions.
1.
gage parking brake, and remove key from the ignition
switch.
Park machine on a level surface, stop engine, en-
.030”
(.76
mm)
2.
Raise bed and support with prop rod.
3.
not fall into cylinder when spark plug is removed.
Clean area around spark plug so foreign matter can-
4.
Pull spark plug wire off spark plug and remove plug
from cylinder head.
Figure 11
IMPORTANT: Replace cracked, fouled, dirty, or mal-
functioning spark plug. Do not clean plug. Grit from
the plug may damage the engine.
Clean Debris from Engine
Note:
Perform this maintenance procedure at the in-
terval specified in the Operator’s Manual or Chapter 2
Product Records and Maintenance.
IMPORTANT: Never operate engine without the
blower housing installed. Overheating and engine
damage will result.
–
IMPORTANT: This engine is air–cooled. Operating
the engine with dirty or plugged cooling fins, a
blocked debris screen, or a plugged or dirty blower
housing will result in overheating and engine dam-
age.
5. Make sure static screen and blower housing are rein-
stalled to the engine if removed.
1
1.
gage parking brake, and remove key from the ignition
switch.
Park machine on a level surface, stop engine, en-
2.
Raise bed and support with prop rod.
IMPORTANT: Never clean engine with pressurized
water. Water could enter and contaminate the fuel
system.
2
Figure 12
2.
3.
4.
Clean cooling fins on cylinder head.
1.
Static debris screen
Blower housing
Clean static debris screen and blower housing of dirt
and debris. Remove screen and housing if necessary
(Fig. 12).
Kohler Gasoline Engine
Page 4 – 10
Workman 1100/1110
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Workman 1100, Toro Workman 1110, Toro Workman 2100, Toro Workman 2110 |
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)