4.
cap screw, washer, and spacer (if equipped).
Secure driven clutch to the transaxle input shaft with
CAUTION
A. For machines that have a 5/16” -- 18 cap screw,
torque cap screw from 25 to 30 ft--lb (34 to 41 N--m).
To prevent burns, hold allen wrench with locking
pliers when heating allen wrench.
B. For machines that have a 3/8” -- 16 cap screw,
torque cap screw from 39 to 47 ft--lb (53 to 64 N--m).
5.
Clamp long end of a 2 mm allen wrench with locking
pliers. Heat short end of the allen wrench until it is red
hot.
5.
Install drive belt to the driven clutch (see Service
Drive Belt in Service and Repairs section of Engine
Chapter).
6.
Insert hot end of the allen wrench into the button so
it melts around the end of the wrench. Hold wrench in
place until the button hardens.
6.
Muffler Removal in Service and Repairs section of En-
gine Chapter).
Install muffler to the engine and engine mount (see
7.
Pull and twist on the allen wrench to remove the but-
ton from the ramp.
Ramp Button Replacement (Fig. 17)
Note:
mounting tab as necessary. If the button is loose, apply
Loctite #242 (blue) (or equivalent) on its mounting tab.
If the new button is difficult to install, sand its
1.
parking brake, and remove key from the ignition switch.
Park vehicle on a level surface, stop engine, set
2.
vice Drive Belt in Service and Repairs section of Engine
Chapter).
Remove drive belt from the driven clutch (see Ser-
8.
with a screw driver by prying against the ramp.
Install new button to ramp. Push button in straight
9.
Remove and install remaining buttons.
remove block of wood that was placed to
3.
tions so button is separated sufficiently enough from the
ramp to allow removal.
Turn fixed and moveable sheaves in opposite direc-
10.Carefully
keep the clutch ramps apart.
4.
to keep the ramps apart.
Place small block of wood between the outer ramps
11.
Drive Belt in Service and Repairs section of Engine
Chapter).
Install drive belt to the driven clutch (see Service
Workman 1100/2100/2110
Page 5 -- 13 Rev. A
Drive Train
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Workman 1100, Toro Workman 1110, Toro Workman 2100, Toro Workman 2110 |
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)