Inspection
1.
Inspect the tapered ends of the crankshaft and pri-
mary fixed sheave for scratches. If either is severely
scratched, replace component. If scratches are minor,
burnish the component with emery cloth.
2
2.
place all cam weights as a set (Fig. 14).
Check the surface of the cam weights. If worn, re-
1
3.
Check the rollers. If binding or uneven wear is found,
replace all rollers as a set (Fig. 15).
4.
abrasivepaper.Ifthechrome--platedsurfaceofthebolts
or pins is scaled off, replace the damaged components.
Clean pilot bolts and roller pins with 800 -- 1000 grit
Figure 14
1.
Cam weight
2.
Worn contact surface
5.
wear and/or fraying. If surface is worn/frayed, replace
component.
Check thecontact surface ofthemovable sheave for
2
3
6.
Inspect the clutch spring and replace if damaged or
fatigued.
Assembly (Fig. 12)
1.
If removed, install rollers, washers, and roller pins to
spider. Roller pins should be lubricated with Toro part
(or equivalent).
1
#104--7011
Figure 15
2.
Lubricate cam weights with Toro part #104--7011 (or
equivalent).Makesurelubricantpenetratestopilotbolts
by rotating and sliding the weights side to side, or re-
move weights if needed to lubricate properly. Assemble
cam weights to moveable sheave as follows:
1.
2.
Roller
3.
Roller uneven wear
Weight contact surface
A. Make sure the threads of the pilot bolts are clean
and dry. Apply Loctite #271 (or equivalent) to the
threads of each bolt.
2
1
1
IMPORTANT: To maintain the balance of the clutch,
all pilot bolts must be installed with their threads
pointing in a clockwise direction (Fig. 16).
2
3
B. Immediately install new self locking nuts on the
pilot bolts. Tighten nuts until they just touch the
sheave casting. Never reuse self--locking nuts.
1
2
3.
Apply Loctite #271 (or equivalent) to the threads of
the fixed sheave post.
Figure 16
4.
moval tool kit (TOR4098: see Special Tools). Make sure
to align matchmark.
Installspidertothefixedsheavepostusingspiderre-
1.
2.
Pilot bolt
Pilot bolt threads
3.
Moveable sheave
5.
6.
able sheave with cap screws. Torque cap screws from
75 to 100 in--lb (8.5 to 11.3 N--m).
Torque spider to 100 ft--lb (136 N--m).
Position cover to clutch. Secure cover to the mov-
Workman 1100/2100/2110
Page 5 -- 11 Rev. A
Drive Train
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Workman 1100, Toro Workman 1110, Toro Workman 2100, Toro Workman 2110 |
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)