Assembly (Fig. 25)
Coat round piston with a small amount of silicone
6. Position gasket and cover to housing. Secure cover
to housing with four cover screws. Torque screws from
1.
72
to 94 in--lb (8.1 to 10.8 N--m).
grease and coat square seal with clean brake fluid.
7.
place rubber springs to housing.
If removed, press piston plugs into oval piston and
2.
3.
4.
grease. Insert oval piston into housing with logo on pis-
ton face orientated to the rubber spring side of the hous-
ing.
Install square seal and round piston into cover.
Insert o--ring into bore of caliper housing.
8.
Apply light coat of grease to rubber springs.
Coat housing bore with a small amount of silicone
9.
bly.
Place outer and inner brake pads to caliper assem-
10.Push caliper on to bracket rails being careful not to
damage rubber springs.
5.
Rotate round piston so the piston slot will mate with
oval piston boss.
Front Brake Caliper Service (Workman 1110 and 2110) (Serial Number Above 240000000)
Disassembly (Fig. 26)
3
1.
Ifcaliper is equipped with anti--rattleclip, removeclip
from caliper, pins and brake pads.
2
2.
Remove pins from caliper by prying with a flat blade
screwdriver through loop in pins.
3.
poses, note orientation of inner and outer pads as the
pads are not the same.
Slide brake pads from caliper. For assembly pur-
4.
to less than 1/32” (0.8 mm).
Replace thebrakepads ifthefrictionmaterial isworn
1
Assembly (Fig. 26)
Figure 26
1.
2.
Brake pad
Pin (2 used)
3.
Clip (if equipped)
1.
to push caliper pistons back into the caliper bore before
installing new pads.
If brake pads are being replaced, it will be necessary
2.
material on pads is toward brake rotor position.
Slide brake pads into caliper. Make sure that lining
3.
Secure pads intocaliper withtwo (2)pins. Makesure
that pins snap into caliper slots.
4.
If caliper is equipped with anti--rattle clip, install clip
to caliper, pins and brake pads.
Workman 1100/1110/2100/2110
Page 7 -- 39 Rev. C Chassis, Wheels, and Brakes
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Workman 1100, Toro Workman 1110, Toro Workman 2100, Toro Workman 2110 |
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)