Adjustments
Adjust Starter/Generator Belt
Note:
terval specified in the Operator’s Manual or Chapter 2
Perform this maintenance procedure at the in-
4
2
1/4”
–
Product Records and Maintenance.
3
10
lbs.
1.
Park machine on a level surface, stop engine, en-
gage parking brake, and remove key from the ignition
switch.
2.
3.
leys with 10 lb (44.5 N) of force, adjust jam nut on the
starter rod until the belt flexes 1/4 inch (6 mm).
Loosen starter generator pivot bolt.
1
While pressing the belt at mid–span between the pul-
4.
Tighten starter generator pivot bolt.
Figure 4
1.
2.
Generator pivot bolt
Jam nut
3.
Starter rod
Torque arm
4.
Adjust Throttle Cable
Note:
Workman 2100 and 2110 machines with Serial
2
Numbers above 240000000 are equipped with an en-
gine governor rather than a transaxle governor. Refer to
the Briggs & Stratton Repair Manual at the end of this
chapter for governor information on these machines.
Releasing the accelerator pedal should allow the throttle
cable to close the carburetor throttle control lever so that
the lever touches the adjustment screw. The adjustment
screw keeps the throttle valve inside the carburetor
open slightly to prevent the valve from binding.
3
1
1.
Park machine on a level surface, stop engine, en-
gage parking brake, and remove key from the ignition
switch.
Figure 5
3.
1.
2.
Governor arm
Throttle cable
Cable bracket
2.
Lift cargo bed and prop with rod to gain access to the
engine.
1
3.
Rotate governor arm on transaxle fully clockwise
(Fig. 5).
4.
Make sure of the following:
A. The engine throttle control lever should be to the
fully open position (Fig. 6).
4
2
B. Adjust throttle cable at the cable bracket as nec-
essary, so there is no compression of the throttle
cable (Fig. 5). This will allow the throttle control lever
to fully close when the accelerator pedal is released.
3
Figure 6
3.
4.
1.
2.
Carburetor
Throttle cable
Adjustment screw
Throttle control lever
Briggs & Stratton Gasoline Engine
Page 3 – 6 Rev. B
Workman 2100/2110
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Workman 1100, Toro Workman 1110, Toro Workman 2100, Toro Workman 2110 |
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)