Check Driven Clutch Spring Torsion
1.
Park machine on a level surface, stop engine, set
parking brake, and remove key from the ignition switch.
1
2.
Place transaxle in gear to prevent the fixed sheave
from moving.
2
4
3.
Remove drive belt from the driven clutch (see Ser-
vice Drive Belt in Engine Chapter).
IMPORTANT: Use protective strips of soft metal
when clamping the moveable sheave with locking
pliers to prevent damage to the sheave.
3
4.
5.
Clamp moveable sheave with locking pliers.
Measure spring torsion.
Figure 18
1.
2.
Moveable sheave
Drive belt
3.
4.
Button
Ramp (fixed sheave)
A. Pull scale tangentially to the outer diameter of the
moveable sheave.
B. When the button on the ramp of the moveable
sheave is 0.125 inch (3.18 mm) from the ramp of the
fixed sheave, read the scale.
C. The reading should be 16 to 20 lbf (71 to 89 N).
6.
If the above specification is not met, replace the driv-
en clutch.
Change Transaxle Fluid
Note:
Perform this maintenance procedure at the in-
terval specified in the Operator’s Manual or Chapter 2
–
Product Records and Maintenance.
15
(21
to 18 ft–lb
to 25 N–m)
1.
Park machine on a level surface, stop engine, set
parking brake, and remove key from the ignition switch.
1
2
2.
Remove drain plug from the right side of the trans-
axle case. (Fig. 19) Let fluid flow into a drain pan.
3.
When fluid stops draining, reinstall and tighten drain
plug (Fig. 19). Torque plug from 15 to 18 ft–lb (21 to 25
N–m).
Figure 19
2.
1.
Drain plug
Level indicating plug
4.
Use 10W–30 motor oil to fill the transaxle case.
A. Fill case with about 1.5 quarts (1.4 liters) of motor
oil (Fig. 20).
1
B. Or, fill case until oil level is at the bottom level of
the indicator hole with the plug removed (Fig. 19).
5.
plugs that were removed (Fig. 19 and 20).
Reinstall level indicating plug and fill cap. Tighten
2
6.
axle to fill. Recheck oil level. Replenish oil if required.
Start engine and operate vehicle to allow the trans-
Figure 20
2.
1.
Fill cap
Driven clutch
Drive Train
Page 5 – 14
Workman 1100/2100/2110
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Workman 1100, Toro Workman 1110, Toro Workman 2100, Toro Workman 2110 |
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)