Toro 02110SL Rev D Service Manual Workman 1100 1110 2100 2110 Preface Publication

5.
securing the steering column to the mounting plate on
the frame.
Remove four flange lock nuts  and carriage screws
NOTE:  Apply antiseize lubricant to the steering  gear-
box shaft before installing to steering shaft knuckle.
5.
Position knuckle of the lower steering shaft onto the
6.
coverifdamaged.Slidesteeringshaftoutofthesteering
column.
Remove dust cover from the steering shaft. Replace
gearbox shaft. Secure knuckle to the steering gearbox
shaft with cap screw and lock washer.
6.
Connect both tie rods to thePitman armon thesteer-
7.
steering gearbox (see Lower Steering and Front Wheel
Removal).
Disconnect both tie rods from the Pitman arm on the
ing  gearbox  (see Lower  Steering  and  Front  Wheel
Installation).
NOTE:  Apply antiseize lubricant to  the steering shaft
8.
the steering  gearbox  to the  tower plate  on the  front
frame. Remove gearbox from the tower plate.
Remove flange lock nuts and cap  screws securing
taper before installing the steering wheel.
7.
Position front tires straight ahead. Position steering
wheel to  the steering shaft  so that  the leg of  the “Y”
formed by the wheel struts is directed towards the oper-
ator platform.
Installation
1.
Position steering gearbox  to the tower plate of the
front frame with the Pitman arm facing down and to the
rear. The gearbox shaft must  be to the left side of the
tower.
8.  Secure steering wheel to shaft with lock washer and
nut. Torque nut from 13 to 17 ft--lb (18 to 23 N--m). Install
steering wheel cover to wheel.
2.
cap screws and flange lock nuts.
Secure steering gearbox to the tower plate with four
9.  Install front hood to the frame and fenders (see Front
Hood Installation).
3.
Place dust cover onto the shaft.
Insert steering shaft up through the steering column.
10.Check  front  wheel  alignment   (see  Adjust  Front
Wheel Toe--in).
4.
frame with four carriage screws and flange lock nuts.
Secure steering column to the mounting plate on the
Workman 1100/1110/2100/2110
Page 7 -- 15   Rev. C   Chassis, Wheels, and Brakes
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags, , ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 194 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website