Toro 02110SL Rev D Service Manual Workman 1100 1110 2100 2110 Preface Publication

5.
to the seat base (Fig.  17). Separate shift bracket from
the choke cable and seat base.
Remove four long cap screws securing the shift plate
2.  Loosen hose clamp  and disconnect fuel hose from
the tank.
3.
Release tank  strap from fuel  tank. Do not  remove
6.
Remove four hex head flange screws and flat wash-
strap from floor plate and frame cross member. Remove
tank from frame.
ers securing the front of the seat base to the frame. Re-
move four hex head flange screws securing the back of
the seat base to the frame.
Fuel Tank Installation (Fig. 18)
1.
cross member with tank strap.
Position fuel tank to frame. Secure tank to frame and
IMPORTANT:Make sure  shift bracket, shift  cables,
choke cable, and fuel tank do not catch on the seat
base during removal.
2.
Connect fuel hose to the tank and secure with hose
clamp.
7.
Lift seat base carefully from the machine.
3.
lation).
Install seat base to the frame (see Seat Base Instal-
Seat Base Installation
IMPORTANT:Make sure  shift bracket, shift  cables,
choke cable, and fuel tank do not catch on the seat
base during installation.
1.
Position seat base carefully to the frame.
Do not tighten fasteners securing the seat base
4
2
Note:
to the frame until all of them are installed.
5
2.
Install four hex head flange screws and flat washers
through the  frame and  to  the front  of the  seat base.
Install four hex  head flange screws through the  frame
and into the back of the seat base. Tighten all fasteners.
1
3
3.
through the opening at the front of the seat base.
Place shift  bracket, shift  cables,  and choke  cable
4.
Position choke cable and shift plate to shift bracket
Figure 17
4.
5.
making sure to capture cable flange. Secure shift plate
to shift bracket with four short cap screws. Screw knob
onto the shift lever (Fig. 17).
1.
2.
3.
Shift lever
Cap screw (short)
Shift plate
Cap screw (long)
Choke cable
5.
Secure shift plate to seat base with 4  long cap screws
(Fig. 17).
Position shift plate with shift bracket to the seat base.
1
6.
On Workman 2110 machines,  install parking brake
assembly to seat base (see Parking Brake Assembly in
the Service and Repairs section of Chapter 7 – Chassis,
Wheels, and Brakes).
Fuel Tank Removal (Fig. 18)
2
3
WARNING
Figure 18
3.
Use caution when working with fuel system com-
ponents (see Fill Fuel Tank and Fuel Safety Pre-
cautions).
1.
2.
Fuel hose
Fuel tank
Tank strap
1.
Remove seat base from  the frame (see Seat Base
Removal).
Workman 2100/2110
Page 3 – 15   Rev. B
Briggs & Stratton Gasoline Engine
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags, , ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 194 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website